Easyfly Mechanism: New Angle Chart
by SRV Distribution
Easyfly mechanism: tilt angle table for all locking holes
The new tilt angle table lets you define the tilt of a loudspeaker on the Easyfly mechanism before installation. The table is available for download in English and German.
The Easyfly mechanism is a Voice-Acoustic rigging mechanism that works without tools. It clicks into the dedicated Easyfly rigging rail of the loudspeaker and is secured with two locking bolts. Hanging and aligning the loudspeaker takes a few seconds. Compared to a conventional rigging yoke, the mechanism is considerably smaller and barely visible on the loudspeaker.
The Easyfly rigging rail is built into the following models: CXN-12, CXN-16, Modular-10, Modular-12P, Modular-15, Score-6, Score-8, VENIA-6, VENIA-8 and Convert-412PS. Modular-10, Modular-12P and Modular-15 have the rail on two sides of the enclosure and can be flown either horizontally or vertically. Each loudspeaker also has a separate attachment point for the mandatory safety cable.
The tilt is set on a perforated rail with 16 locking holes. The bracket is fixed in the required hole with a ball lock pin. The resulting angle depends on the loudspeaker model and its mounting orientation. The table lists the measured tilt angle per hole for every combination. Depending on the model, the range extends from 24.4° upward to 77.2° downward. Example: a vertically mounted Modular-10 in hole 9 tilts 15.4° downward. This way, the angle from the simulation can be assigned directly to a hole, with no trial and error on site.
Two brackets are available for installation. The self-locking truss clamp is used on trusses, and the universal suspension device for rigging mechanisms is used on high ceilings. Both are attached to the bracket of the Easyfly mechanism with an M10 bolt and a lock nut, then hung into the mechanism with the ball lock pin.
The Easyfly mechanism is available in black (standard). White and custom RAL colours are available on request. Item no.: 409991001.