Info

  • 2 x 6.5"/1 x 1", 2-way d’Appolito multifunctional speaker, bass reflex
  • High-performance mid-woofers with Dual-Gap technology and very low power compression
  • Three different dispersion angles with a rotatable horn: 120° x 40°, 90° x 60°, or 60° x 40°
  • Phase-optimized passive crossover
  • Long range and excellent speech intelligibility with increased direct sound proportion
  • Full-range capability, suitable for speech reinforcement and background music without a separate subwoofer
  • Monitor operation possible with 25° and 55° monitor angles
  • Tool-free mounting of the multifunctional bracket using a Camlock closure
  • Click-in Easyfly mechanism, tool-free mountable flying hardware
  • Integrated tiltable stand flange with +/- 18° tilt adjustmen

The Voice-Acoustic Score-6 is a passive 2-way system equipped with two 6,5” transducers in a D'Appolito arrangement and a 1” compression driver coupled to a rotatable CD horn with either 60° x 40°, 90° x 60° or 120° x 40° dispersion.

The 120° horn is ideal for listeners who are very far away from the main dispersion centre. Thanks to the narrow beam angle of 40° in the vertical axis, a very good high-frequency response on long distance is achieved with this horizontally wide-radiating horn.

The D'Appolito design of the Score-6 ensures a long way throw in the low-mid frequencies. The arrangement of the 6,5” transducers above and below the horn creates a physically induced coupling and vertically directed dispersion down to the low-mid frequencies.

The two 6,5” transducers of the latest development generation generate very high sound quality with lowest distortion. The innovative dual-gap technology ensures a very symmetrical drive at high excursions and very good cooling for minimal heat loss through power compression. The power handling of each 6,5” transducer has thus been increased to a considerable 320W AES. With 640W AES power handling, low distortion and high excursion, the Score-6 achieves above-average performance in its size class.

The Score-6 is a full-range loudspeaker and enables speech reinforcement and background music without the need of a separate subwoofer. In combination with subwoofers, the result is a stylish and elegant high-performance compact PA that satisfies the highest sound quality requirements. With its slim appearance, the Score-6 looks stunning in all mobile applications and fixed installations.

The Score-6 has a 55° and 25° monitor angle. The low design also makes it an ideal near-fill on the front of the stage when positioned horizontally.

The passive crossover is time and phase optimized.

The three different horns with different dispersion angles and the well thought-out detailed solutions with a wide range of accessories allow the Score-6 to be used and installed in a variety of ways.

With the integrated tiltable speaker flange, the tool-free mountable Easyfly mechanics or the multifunctional L-bracket, as well as U- and C-brackets and various M8 and M6 mounting points, all requirements are covered. A safety cable for secondary safety can be attached with a single-stud-fitting to the corrosion-resistant input panel made of V2A stainless steel.

Like the other Voice-Acoustic loudspeakers, the housing is made of sturdy birch plywood of highest quality: CNC milled, grooved, screwed and waterproof glued. The surface is protected by a stable and moisture-resistant polyurea coating in black. White speakers and special colours with 2K textured paint are optional available.

Technical Data

Drivers
2 x 6,5" Neodym LF with 2" voice coil dual gap
1 x 1" compression driver with 1,75" voice coil

Frequency range
68 Hz – 20,2 kHz (- 10 dB)   
80 Hz - 16,3 kHz (+/- 3 dB)

Coverage range (h x v)
60° x 40° or 90° x 60° or 120° x 40°

Impedance
4 Ω

Powerhandling (AES / Programm / Peak)
640 W / 1.280 W / 2.560 W

Sensitivity 1 W/1 m
103 dB SPL

Sound pressure at (AES / Programm / Peak)
123 dB SPL / 126 dB SPL / 129 dB SPL

Connection
2 x Neutrik NL4 Speakon IN/OUT (loop through), configuration: 1+/1-

Finish
Polyurea coating in RAL 9005. Special colours also possible with Warnex textured paint

Mounting
1 x Easyfly mechanism for vertical Mounting                                     
1 x Camlock for tilt and swivel multifunctional brackets
1 x single-stud mount in the metal connection panel for safety rope
2 x M6 threaded points for rear, adjustable wall brackets
1 x M8 thread point for mounting a rear crosspiece clamp
1 x tilting pole socket +/- 18°, tilt for a stand or mounting pole

Dimensions/Weight     
538 (h) x 202 (w) x 255 (d) mm / 10,8 kg

Downloads

Accessoires

Score-6 horn 60° x 40°

Item no. ET1101007864600

Interchangeable 1" horn 60° x 40° for Score-6, rotable.

Score-6 horn 90° x 60°

Item no. ET1101007896600

Interchangeable 1" horn 90° x 60° for Score-6, rotable.

Score-6 horn 120° x 40°

Item no. ET1101007896600

Interchangeable 1" horn 120° x 40° for Score-6, rotable.

Double-Flightcase for Score-6

Item no. 506003002

Heavy-duty Hood-Flightcase for two Score-6. 4 Blue Wheels, 4 large butterflys, 6 large folding handles. 9 mm wood with black and scratch-resistant surface, stable 35 x 35 mm edge profile with 2.5 mm material thickness and 5 mm outer radius and recessed rivet groove. Dimensions/Weight: 730 (h) x 350 (w) x 510 mm (d) / 23,5 kg.


Quad-Flightcase for Score-6

Item no. 506003004

Heavy-duty Hood-Flightcase for four Score-6. Extra compartment for various accessories, 4 Blue Wheels, 4 large butterflys, 6 large folding handles and 4 stacking recesses in the lid. 9 mm wood with black and scratch-resistant surface, stable 35 x 35 mm edge profile with 2.5 mm material thickness and 5 mm outer radius and recessed rivet groove. Dimensions/Weight: 730 (h) x 585 (w) x 585 mm (d) / 38,8 kg.


Carrying bag for Score-6

Item no. 506002000

Transport bag for 1 x Score-6. Sturdy Codura fabric with thick-walled protective padding. Sewn-on protective feet on the bottom, sturdy large zipper.

L-bracket Score-6

Item no. 406006001-9005

Multifunctional bracket for Score-6 speakers. The bracket is mounted to the rear in seconds with a camlock connector without tools. With the appropriate accessories, the speaker can be flown upright or tilted more on a stand than is possible with the internal tilting flange. Available in black, white and RAL custom colors.

Truss clamp 50 mm

Item no. 999982301

Truss clamp for Score-6 or Score-8 L-brackets with wing nut. 50 mm width and maximum load of 500 kg, including M10 fastening screw. Available in black or silver.

Truss clamp adapter 50mm

Item no. 408001101

The truss clamp adapter has been specially developed for the Score loudspeaker's multifunction bracket. In combination with the 50 mm truss clamp, the multi-function bracket can then be continuously tilted forwards or backwards, or can also be used as a wall and ceiling bracket. Available in black, white and RAL custom colors.

Tripod transducer with threaded pin

Item no. 999924521

Tripod transducer with threaded pin M10 x 12 mm and large clamping screw for locking to the tripod. For all common speaker stands with Ø 35 mm. Available in black and white.

U-bracket for Score-6

Item no. 406001001-9005

Sturdy U-bracket for truss and ceiling mounting. 2 x M10 hex screws included. Available in black, white and RAL custom colors.

C-bracket for Score-6

Item no. 406003001-9005

Sturdy C-bracket for vertical or horizontal mounting to trusses, walls and ceilings. Includes mounting plates which can be exchanged for the tilt flange and Easyfly rail for a more stylish finish. 2 x M10 hex screws included. Available in black, white and RAL custom colors.

Clamping lever screw M10 x 30 mm

Item no. 600781030

Hand lever M10 x 30 mm, adjustable, flat design, steel black burnished with plastic lever, suitable for all U- and C-brackets.

Flat knurled screw M10 x 25 mm

Item no. 999910251

Flat knurled screw M10 x 25 mm, stainless steel black burnished for all U and C-brackets. Can be used as an alternative to the hex head screws supplied with the brackets. Available in black and silver.

Easyfly-mechanics

Item no. 409991001

Tool-free flight-mechanics for clicking and exact alignment of the speaker in the horizontal and vertical axis. Removable recording for example the self-lock clamp included. Available in black, white and RAL custom colors.

Carrying bag for Easyfly-Mechanics

Item no. 409992000

Carrying bag for up to two Easyfly-Mechanics with attached truss clamp plus accessory compartment for e.g. two safetys with single studs.

Self-lock clamp

Item no. 999950731

Loudspeakers can be flown by one person with the self-lock clamp. The clamp hooks directly into the truss and can be easily tightened. Load capacity 250 kg.

Single stud

Item no. 999957450

Single stud for securing a loudspeaker with safety cable.

Safety 6/1000

Item no. 999963100

1 m safety cable 6 mm Ø for securing a suspended loudspeaker. One side with a screwable quick connect.

Multifunctional rotating ceiling bracket

Item no. 409998001

For hanging speakers from ceilings using steel cables or chains and various accessories. Horizontal alignment due to central pivot axis. Max. load: 60 kg. Supplied without further mounting accessories. Available in black, white and RAL custom colors.

Universal suspension device for flight mechanics

Item no. 409992001

For suspending speakers from very high ceilings or trusses. Prevents speakers from twisting due to two parallel steel cables or chains and allows horizontal alignment due to central pivot axis. Suitable for Easyfly mechanics, LA-Stick flying mechanics, Ikarray-8 flying mechanics and all U- and C-brackets. Delivery without further mounting accessories. Available in black, white and RAL custom colors.

Chain fastener 8 mm

Item no. 999908000

Chain fastener 8mm, for e.g. single and double-stud fittings or safetys.

Wall holder type 481

Item no. 999924481

Wall holder with large wall plate for middle heavy loudspeaker. Easy installation due to practical mounting and screwing. Swivel and 0-30° tiltable, wall clearance 104 mm, max. 25 kg load. Available in black and white.

Wall mount with extension type 403

Item no. 409994031

Wall bracket with cantilever type 403 and large wall plate for middle heavy loudspeaker. Easy installation due to practical mounting and screwing. >180° swivel and 0-30° tiltable, wall clearance 280 mm, max. 25 kg load. Available in black and white.

Wall- and Trussholder type 150

Item no. 999924150

Wall- and truss holder type 150 (black), swivelable, flange socket Ø 35 mm, wall clearance 515 mm, max. 50 kg load.

Wall holder type 169

Item no. 999924169

Wall holder Typ 169, swivelable, tiltable in three steps 0°/12.5°/25°, flange socket Ø 35 mm, wall clearance 359 mm, max. 25 kg load. Available in black

Wall holder type 173

Item no. 999924173

Wall bracket type 173, 145° swivel and 0-30° tiltable. The tilt can be fixed in 6 steps. With Ø 35 mm flange socket holder. The distance between the flange socket holder and the wall can be adjusted in four steps. The bracket is almost completely concealed by the speaker. Wall distance 499 mm, max 25 kg load. Available in black.

Carrying bag big for 2 x speaker stand/ rod

Item no. 999920000

Carrying bag big, for 2 x speaker stands/speaker rods or Rolldolly outrigger, 1.200 x 190 x 290 mm.

Speaker stand type 214/67 with Ring-Lock function

Item no. 999921467

Speaker stand type 214/67 with Ring-Lock function, high 1.370 - 2.170 mm, max. 50 kg load.

Speaker stand type 213 with crank

Item no. 999921300

Speaker stand type 213 with a hand crank, high 1.385 - 2.180 mm, max. 50 kg load.

Adapter with Ring-Lock function

Item no. 999921441

Stand adapter with Ring-Lock function, e.g. for speaker stand type 213 or distance rod type 246/26. The ring-lock function ensures a clearance-free fit in the speaker's high stand flange.

Distance rod with crank type 213/40

Item no. 999921340

M20 Crank speaker rod type 213/40 with Ring-Lock function for clearance-free mounting in the speaker flange, high 920 - 1.520 mm, max. 35 kg load.

Telescopic rod type 213/68

Item no. 999921368

M20 Telescopic speaker rod type 213/68 extra high with Ring-Lock function for clearance-free mounting in the speaker flange, high 1.100 - 1.800 mm, max. 35 kg load.

Telescopic rod type 213/37

Item no. 999921337-9010

M20 Telescopic speaker rod type 213/37 (white), high 905 - 1.450 mm, max. 35 kg load.

Telescopic rod type 246/26 black

Item no. 999924626-9005

M20 Telescopic speaker rod type 246/26 super high (black), high 1.400 - 2.400 mm, max. 30 kg load.

Telescopic rod type 246/26 white

Item no. 999924626-9010

M20 Telescopic speaker rod type 246/26 super high (white), high 1.400 - 2.400 mm, max. 30 kg load.

Carrying bag long

Item no. 999924609

Carrying long, für 2 x telescopic speaker rod type 246/26, 120 x 19 x 29 cm, 1.420 x 200 x 140 mm.

Steel base plate round 45cm

Item no. 999912311

Round base plate 45 cm (black), 10 kg with extra + 5 kg weight plate for M20 speaker rods.

Carrying bag for round base Ø 45 cm

Item no. 999912399

Carrying bag for base plate 45 cm, outside dimension Ø 48 cm.

Steel base plate square 55 cm black

Item no. 999926716-9005

Square steel base plate 55 cm (black) with with 3x M20 for speaker rods, especially suitable for telescopic distance rod type 256/26 super high, 13,5 kg.

Steel base plate square 55 cm white

Item no. 999926716-9010

Square steel base plate 55 cm (white) with with 3x M20 for speaker rods, especially suitable for telescopic distance rod type 256/26 super high, 13,5 kg.

Carrying bag for 55cm base plate

Item no. 999933100

Carrying bag for 55cm base plate, outside dimension 60 x 60 cm.

Cable Clip for speaker stand/ rod

Item no. 999935000

The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.

speakON cable 0.5/1/3/6/10/15/20/30 m

Item no. 80440XXX1

Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

speakON adapter

Item no. 999654669

Adapter to connect two speaker cables.