Info
- 12”/1.4” scalable multifunctional loudspeaker with monitor angle
- Phase-optimised passive crossover
- 2 different dispersion angles with rotatable horn 60° x 40° or 90° x 60°
- Horizontal arrayable with interference minimisation with horn rotated to 40° x 60
- Click-in Easyfly mechanism on two sides, flying mechanism can be mounted without tools
- Full-range capable, suitable for speech reinforcement and background music without a subwoofer
- Integrated high stand flange with +/- 13.5° tilt in 4.5° steps
- Easy handling thanks to optimized handle design
The Voice-Acoustic Modular-12P is a passive 2-way system equipped with a 12' transducer and a 1.4' compression driver coupled to a rotatable CD horn with either 60° x 40° or 90° x 60° dispersion.
As the name suggests, the Modular Series is extremely flexible and represents a new way of combining arrayable point source systems with multi-functional single loudspeakers. As well as being used as stand-alone loudspeakers, powerful tops with subwoofer support or monitors on stage, the Modular Series is also designed to be used side-by-side in a horizontal array.
Any interference and associated sound interruptions between the sound sources are reduced to a minimum by using special housing geometry, suitable for the narrower beam angle of the rotatable horn. Each horn works only in its defined sound directivity. This technique allows the user an even greater range of applications with only one speaker model and is registered at the Patent Office.
The Easyfly click-in mechanism, which is also registered with the patent office, allows the system to be hung up without tools and precisely aligned in just a few seconds. The mechanism is much more elegant and smaller than a conventional flying bracket. The Modular series is equipped with unobtrusive mounting rails on two sides of the enclosure. This allows the speaker to be hung vertically or horizontally using the Easyfly mechanism. A third flying rail is available at the rear for a required safety cable.
For precise adjustment on a stand or distance rod, the Modular Series has an internal speaker flange with a variable tilt angle of +/- 13.5° in 4.5° increments. The result is a more direct sound reaching the listener and less reflections in the room.
The 12" transducer used in the Modular-12 is specially designed to produce clean, detailed mid-range sound with high, undistorted SPL. A low moving mass (46g) combined with an extremely powerful neodymium drive unit (B/L factor 17.6) allows for high efficiency and performance normally associated with larger speakers. Elaborate ventilation holes in the magnet system make the chassis highly resilient, allowing heat to be dissipated and power compression to be minimised. Aluminium demodulation rings in the magnet system ensure minimal distortion.
For fixed installations, the Modular-12 can be installed using the Easyfly mechanism, rear mounted tilt and swivel wall brackets, a C-bracket or the 12 internal M10 threaded points with internal steel brackets.
Array
For maximum flexibility the user can choose between two different beam angles 60° x 40° or 90° x 60°. An exchange of horns can be made by the bi-amping control yourself at any time. In the HDSP amplifiers series and the controller board of the self-powered subwoofer specific speaker settings are saved as presets for both viewing angle.
Technical Data
Drivers
LF: 1 x 12" Neodym woofer with 3" voice coil
HF: 1 x 1,4" Neodym compression driver with 3" voice coil
Frequency range
63 Hz - 18 kHz (- 10 dB)
90 Hz - 17 kHz (+/- 3 dB)
Coverage range (h x v)
60° x 40° or 90° x 60° (interchangeable, rotatable and arrayable horns)
80° x 60° with two in a horizontal array with horn rotated to 40° x 60°
Impedance
8 Ω
Powerhandling (AES / Program / Peak)
450 W / 900 W / 1.800 W
Sound pressure at (AES / Program / Peak)
127 dB SPL / 130 dB SPL / 133 dB SPL
Connection
4 x Neutrik NL4 Speakon IN/OUT (4-pole looped through), configuration on 1+/1-
Finish
Polyurea coating black RAL 9005
Textured paint white RAL 9016
Textured paint RAL custom colors
Optional high-gloss chromed grille
Mounting options
2 x Easyfly mechanism for vertical and horizontal mounting
1 x Single-stud mount in the rear panel for safety rope
2 x M6 threaded points for rear, adjustable wall brackets
1 x Tiltable tripod flange +/- 13.5°, for wall bracket with flange socket mount
12 x M10 mounting point for e.g. ring eyelets
C-bracket mountable
Dimensions / Weight
615 (H) x 380 (B) x 310 mm (T) / 23,6 kg
Accessoires
Transport and rain cover Modular-12
Item no. 500121100 | 500121200
Transport and rain cover for Modular-12, stable Cordura fabric with padding, all handles and connections are cut. The front can be folded to the side, behind it there is a sound-permeable gases as rain protection for outdoor applications.
Heavy-Duty Flightcase for Modular-12
Item no. 500123000
Heavy-Duty Flightcase for up to two Modular-12 with compartments for Easyfly mechanism, self-lock clamp and safety cable. 4 blue wheels, 4 large butterflys, 8 large folding handles. 9 mm Wood with black scratch-resistant surface. Stable 35 x 35 mm edge profile 2.5 mm thick, 5 mm outside radius. Dimensions/Weight: 820 (h) x 375 (w) x 906 mm (d) / 35,8 kg.
crossover board Modular-12P
Item no. 2398001
Voice-Acoustic crossover board Modular-12P. For converting existing Modular-12 bi-amping to passive version, incl. cable kit.
Easyfly-mechanics
Item no. 409991001
Tool-free flight-mechanics for clicking and exact alignment of the speaker in the horizontal and vertical axis. Removable recording for example the self-lock clamp included.
Carrying bag for Easyfly-Mechanics
Item no. 409992000
Carrying bag for up to two Easyfly-Mechanics with attached truss clamp plus accessory compartment for e.g. two safetys with single studs.
Self-lock clamp
Item no. 999950731
Loudspeakers can be flown by one person with the self-lock clamp. The clamp hooks directly into the truss and can be easily tightened. Load capacity 250 kg.
Tilting and swivelling wall holder heavy-duty
Item no. 404004001
Wall bracket with large wall plate for heavy loudspeakers. Flat design with small distance between wall and speaker. The mounted speaker can be swiveled sideways and tilted up to 20° in 1° steps. Vertical slippage after adjustment of the tilt angle is eliminated by a hole pattern. Easy installation thanks to practical hanging and screwing. Two truss clamps can be mounted for use on vertical trusses. Max. load capacity 80 kg.
Multifunctional rotating ceiling bracket
Item no. 409998001
For hanging speakers from ceilings using steel cables or chains and various accessories. Horizontal alignment due to central pivot axis. Max. load: 60 kg. Available in white and black. Supplied without further mounting accessories.
Universal suspension device for flight mechanics
Item no. 409992001
For suspending speakers from very high ceilings or trusses. Prevents speakers from twisting due to two parallel steel cables or chains and allows horizontal alignment due to central pivot axis. Suitable for Easyfly mechanics, LA-Stick flying mechanics, Ikarray-8 flying mechanics and all U- and C-brackets. Delivery without further mounting accessories.
Rotating double pipe clamp with aluminum pipe
Item no. 409992000
With this construction you can mount two speakers from the Modular series in horizontal array.
Wall console for flight hardware
Item no. 409994901
Wall mount bracket made of steel with aluminium tube for hanging loudspeakers on walls by using truss clamps and loudspeaker-specific flying hardware. The outriggers of the wall bracket have a row of holes so that the truss clamps, which hold the aluminium tube, can be repositioned. This allows the distance between the speakers and the wall to be varied. All components are black powder-coated. Delivery includes: 2 x wall console, 2 x truss clamps, 1 x 600 mm aluminium tube 50 x3 mm, 2 x plastic caps for the tube. Max. load 75 kg, static calculation available.
Tilting and swivelling wall holder XL
Item no. 999924120
Stable wall holder with tilt and swivel orientation: 180° horizontal, 22° vertical adjustable in 11 steps. Expanding mandrel for play-free seating in the tripod base of the speaker. Max. load capacity: 50 kg.
Wall- and Trussholder
Item no. 999924150
Wall- and Trussholder with a joint and a tube clamp, circa 520 mm long. Max. load capacity: 50 kg.
Single stud
Item no. 999957450
Single stud for securing a loudspeaker with safety cable.
Double-Stud Fitting
Item no. 999957401
For hanging and aligning loudspeakers with chains.
Eye Bolt
Item no. 999917370
M10 x 40 mm eye bolt is screwed into rearward mounting point and the speaker can also be secured directly to the housing with a safety cable.
Chain fastener 8 mm
Item no. 999908000
Chain fastener 8mm, for e.g. single and double-stud fittings or safetys.
Safety 6/1000
Item no. 999963100
1 m safety cable 6 mm Ø for securing a suspended loudspeaker. One side with a screwable quick connect.
Speaker stand type 213 with crank
Item no. 999921300
Speaker stand type 213 with a hand crank, high 1.385 - 2.180 mm, max. 50 kg load.
Speaker stand type 214/67 with Ring-Lock function
Item no. 999921467
Speaker stand type 214/67 with Ring-Lock function, high 1.370 - 2.170 mm, max. 50 kg load.
Distance rod with crank type 213/40
Item no. 999921340
M20 Crank speaker rod type 213/40 with Ring-Lock function for clearance-free mounting in the speaker flange, high 920 - 1.520 mm, max. 35 kg load.
Telescopic rod type 213/68
Item no. 999921368
M20 Telescopic speaker rod type 213/68 extra high with Ring-Lock function for clearance-free mounting in the speaker flange, high 1.100 - 1.800 mm, max. 35 kg load.
Adapter with Ring-Lock function
Item no. 999921441
Stand adapter with Ring-Lock function, e.g. for speaker stand type 213 or distance rod type 246/26. The ring-lock function ensures a clearance-free fit in the speaker's high stand flange.
Steel base plate round 45cm
Item no. 999912311
Round base plate 45 cm (black), 10 kg with extra + 5 kg weight plate for M20 speaker rods.
Carrying bag for round base Ø 45 cm
Item no. 999912399
Carrying bag for base plate 45 cm, outside dimension Ø 48 cm.
Iron base
Item no. 999926705
The iron base 55 x 55 cm has a carrying handle and a cable bushing. The base is suitable distance rods with an M20 screw thread. Weight: 13,5 kg.
Carrying bag for 55cm base plate
Item no. 999933100
Carrying bag for 55cm base plate, outside dimension 60 x 60 cm.
Carrying bag big for 2 x speaker stand/ rod
Item no. 999920000
Carrying bag big, for 2 x speaker stands/speaker rods or Rolldolly outrigger, 1.200 x 190 x 290 mm.
1.4" Horn 60° x 40°
Item no. 999991464
1.4" removable horn with 60° x 40° radiation, rotated at 40° x 60°. Stable cast aluminium thus not cancel the driver unit possible. Through the bi-amping concept can select the appropriate preset for different horns and change at any time in the HDSP amplifiers and self-powered subwoofers.
1.4" Driver unit 60° x 40°
Item no. 999141464
1.4" removable horn and high-frequency driver with 60° x 40° radiation, rotated at 40° x 60°. Saves in frequent changes of horns dismantling the high-frequency driver.
1.4" Horn 90° x 60°
Item no. 999991495
1.4" removable horn with 90° x 60° radiation, rotated at 60° x 90°. Stable cast aluminium thus not cancel the driver unit possible. Through the bi-amping concept can select the appropriate preset for different horns and change at any time in the HDSP amplifiers and self-powered subwoofers.
1.4" Driver unit 90° x 60°
Item no. 999141495
1.4" removable horn and high-frequency driver with 90° x 60° radiation, rotated at 40° x 60°. Saves in frequent changes of horns dismantling the high-frequency driver.
Cable Clip for speaker stand/ rod
Item no. 999935000
The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.
speakON cable 0.5/1/3/6/10/15/20/30 m
Item no. 80440XXX1
Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.
speakON adapter
Item no. 999654669
Adapter to connect two speaker cables.