Score-5 Set

Plug & Play Satellite System

  • 1 x HDSP-3 amplifier
  • 2 x Score-5
  • 2 x L-bracket Set for Score-5
  • 1 x Carrying bag for up to 2 x Score-5
  • 2 x Paveosub-112 with detachable front-wheel board, transport cover
  • 2 x M20 Speaker rod »Ring Lock«
  • 4 x Cable clamps
  • 1 x Carrying bag for 2 x telescopic distance rods without crank
  • 2 x 10 m, 2 x 3 m Speakon cable (4 x 4 qmm)

HDSP-3

Quantity channel
3 CH, class-D latest generation

Power output 4 Ω
4.000 W (1 x 2.400 W + 2 x 800 W)

Power output 8 Ω
2.480 W (1 x 1.580 W+ 2 x 450 W)

Power output 16 Ω
1.200 W (1 x 800 W+ 2 x 200 W)

Damping factor
> 1000 / 8 Ω, 1 kHz

Frequency responce
20 - 20.000 Hz

THD+N
< 0,05 % (20 - 20.000 Hz with 8 Ω)

Signal-to-noise ratio
> 118 dB (20 - 20.000 Hz with 8 Ω)

Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 - 135 V = 110 / 115 / 120 V Betrieb, 190 - 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz

Powerconnector
1 x 16 A Neutrik PowerCon IN

Signal connection analog INPUT/LINK
2 x XLR female/male

Speaker Connections
2 x Speakon

Network connection
1 x Additional rear RJ45 socket for wired network in fixed installations

Cooling
2 x temperature-controlled EBM-Papst low noise axial fan, air flow front to back

Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors

Realtime software-monitoring
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from each ampmodule
Real time meterbridge on PC per channel
Real time access for configuration on each channel
Speaker group building for access multiple speakers with one command

DSP sampling
64 bit, 96 kHz sample rate

DSP preset memory quantity
80 preset locations

Latency
0 - max. 500 microsecond

Dynamic range input
120 db

Nominal input level
+ 6 dbu

Maximum input level
+ 23 dbu

Limiter
Two per way, in each input and output

Filter
10 parametric filter each in- and output, use as Bell, Shelving, Notch, or Allpass filter

Long delay section
0 - 800 ms (max. 275 m delay) in each input

Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers

Phase adjustment
0 - 180°

X-Over
Butterworth, Bessel, Linkwitz-Riley Filter

Software
Bi-directional realtime VA-WLAN-remote network, software for PC and MAC

Manual hand operation
with 2 x button and 1 x digital encoder-wheel in the internal menu navigation, function lockable

Display
1 x LED display
1 x LCD display with software dimmable and switchable

Body housing
19"/2 HE, 430 mm deep, strong black colored aluminum housing

Weight
4,1 kg

Score-5

Speaker drivers
2 x 5" Neodym woofer (LF) with 32 mm (1,25") voice coil
1 x 1" Ferrit compression driver (HF) with 1" voice coil

System
2-way, d’Appolito multi-functional loudspeaker, bass reflex

Frequency range
71 Hz - 19 kHz (- 10 dB)
139 Hz - 15,7 kHz (+/- 3 dB)

Coverage range (h x v)
70° x 55°

Monitoring angle
55° and 25°, 90° for Nearfill

Impedance
12 Ω

Powerhandling 12 Ω
200 W AES / 400 W programm / 800 W peak

Sensitivity dB SPL 1 W/1 m
92 dB SPL

Sound pressure at (AES / programm / peak)
114 dB SPL / 117 dB SPL / 120 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN/OUT (loop through), configuration: 1+/1-

Handles
1 x handle backside

Mounting
1 x Camlock for tilt and swivel multifunctional brackets. Vertical and horizontally mountable without tools
1 x single-stud mount in the metal connection panel for safety rope (bracket can be secured separately)
2 x M6 threaded points for rear, adjustable wall brackets
1 x M8 Thread point for mounting a rear crosspiece clamp using the M8 cylinder head allen screw or for mounting a Manfrotte M8 stud for a Manfrotto Super Clamp

Housing
12 - 15 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days.

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 5 mm acoustic foam behind grille.
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam.

Dimensions / Weight
450,5 (h) x 172 (w) x 190 mm (d) / 6 kg

Paveosub-112

Speaker drivers
1 x 12" Neodym long excursion woofer (LF) with 4" voice coil, cone waterproof treatment

System
compact and flat bass reflex subwoofer

Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)

Coverage range (h x v)
Omnidirectional

Impedance
8 Ω active separated

Powerhandling LF 8 Ω
1.000 W AES, 2.000 W programm, 4.000 W peak

Sensitivity dB SPL 1 W/1 m
96 dB SPL (half space)

Sound pressure at (AES / programm / peak)
126 dB SPL / 129 dB SPL / 132 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN/OUT, 2+/- LF

Handles
2 x shell type handle

Foot
8, each 4 x on a flat and narrow side with opposite stacking trays

Fittings
2 x M20 pole mount
2 x latches on the front for detachable wheelboard

Housing
30 and 15 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
300 (h) x 520 (w) x 485 mm (d) / 23,1 kg