Item no. 501121000
Transport protection cover for Paveosub-112 (sp) made of stable Codura fabric with padding. The handles are cut out.
Item no. 501124000
Detachable wheelboard to mount on Paveosub-112 (sp), 15 mm wood, stackable, 2 butterfly locks, 2 handles, 4 blue wheels, engraved logo.
Item no. 500442000
Carrying bag for up to two LA-Stick 4x4 with angular mechanics. Including insertable partition, if you want to carry the LA-Sticks without angle mechanism separately.
Item no. 500443000
Heavy-Duty Flightcase for up to four LA-Sticks 4x4 included angle mechanism. 2 internal 90°rolls, 2 large Butterflys, 6 large folding handles, 7 mm wood with black and scratch-resistant surface, stable 35 x 35 mm edge profile with 2.5 mm thickness and 5 mm outer radius and recessed grooved rivet, truck pack size. Case can be run like a suitcase trolley.
Item no. 400441001
Stable swivel bracket for positioning and alignment. Also used to mount several LA-Sticks directly on a subwoofer without distance rod.
Item no. 400442000
Flange adapter for handles with M10 female thread to M20 male thread. For LA stick 4x4 in conjunction with an upended Paveosub-112/112sp.
Item no. 400443001
The inclination angle can be externally fine-tuned via ball-bearing-mounted spindle mechanism. This very sturdy mechanism renders the bending joints in ball-lock-pin form on the front side of the loudspeaker unnecessary.
Item no. 999919780
With this adapter you can attach speakers without built-in flange on stands or wall brackets and adjustable up to 30 ° in the tilt.
Item no. 4004450X1
Tilt adapter for connecting and aligning the speakers to each other instead of the spindle mechanics. The three adapters each have a fixed angle of 0°, 4° and 8° degrees and are attached with the speakers in the back existing M6 and M10 screws.
Item no. 400444001
Tool-free flight mechanics for exact alignment of the La-Stick in the horizontal and vertical axis. Delivery without self-lock clamp.
Item no. 409992001
For mounting the Easyfly- and the flight-mechanism of the LA-Stick 4x4 by chains on very high ceilings, where a mounting with heavy duty anchors is not possible. U-bracket of the flight mechanics is not included.
Item no. 999921300
Stable speaker stand for cranks with 50 kg load capacity and double protection against falling. Height: 139 to 218 cm.
Item no. 999921467
Stable speaker stand for extraction with 50 kg load capacity, double protection against falling. Expanding mandrel system which provides a tight and firm fit for the speaker. Height: 132 to 220 cm.
Item no. 999921340
Speaker rod crank with 50 kg load capacity and expanding mandrel system for play-free seating in the tripod base of the speaker. Height: 92 to 152 cm
Item no. 999921368
Speaker rod with 35 kg load capacity and expanding mandrel system for play-free seating in the tripod base of the speaker. Height: 110 to 180 cm
Item no. 999921441
Adapter with expanding mandrel system to be placed on speaker stand for cranks, for play-free seating in the tripod base of the speaker.
Item no. 999912311
45 cm iron base for M20 distance rods. For speakers up to 25 kg. Height: 110 to 181 cm. Weight: 11 kg. Carrying bag available.
Item no. 999912399
Robust carrying bag for round base Ø 450 mm
Item no. 999926705
55 cm iron base for M20 distance rods. Elegant base with intergrated handle and cable managemnet. Weight: 13,5 kg.
Item no. 999933100
Robust carrying bag for Iron base 55 cm. With zipper and cushioned handle. Tear-resistant nylon material.
Item no. 999920000
Carrying bag for two speaker stands or distance rods with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.
Item no. 999921000
Extremely robust, padded carrying bag for two telescopic distance rods without crank, with two carrying straps and zippers. The padded partition wall protects the two distance rods from scratching. The floor and all load points are reinforced. Made of easy-care water-repellent nylon.
Item no. 999908131
Wallholder for LA-stick 4x4, for hanging on the M10 thread from the top. Alignment in both axes.
Item no. 999924496
Robust and useful loudspeaker ceiling mount with 250 mm distance and internal cable management. The swivel area is +/-45 °. Within the parameters - the settings range from 0 to 45°. Carrying capacity 25 kg.
Item no. 999924481
Stable wall holder with tilt and swivel orientation: 140° horizontal, 30° vertically adjustable. If the back fastened with two M6 screws on the speakers and is therefore discreet and elegant behind the speaker. 25 kg carrying capacity.
Item no. 999924120
Stable wall holder with tilt and swivel orientation: 180° horizontal, 22° vertical adjustable in 11 steps, expanding mandrel for play-free seating in the tripod base of the speaker. Carrying capacity 50 kg.
Item no. 999924150
Wall- and Trussholder with a joint and a tube clamp, circa 520 mm long. Load capacity 50 kg.
Item no. 80440XXX1
Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.
Item no. 999654669
Speakonadapter to connect two speaker cables.
Item no. 999490010
19"/3 HE intelligent 32A power distributor, suitable for applications in temporary and permanent installations. 32 A CEE Input, 6 x Schuko Output in parallel 6 x Neutrik Powercon Output, 1 x 16 A CEE, 6 x independent circuits (RCBO) and precise multi meter.
Item no. 910946003
3HE/19" flight case for HDSP-12 amplifier and PD-32-6 power distributor. The cases can be stacked without slipping and connect via an internal mechanism to form a tower. The coupling with a wheelboard is done in the same way. In addition, the racks are equipped with retractable cover and shock absorbing rack rails. 60 cm Packing size = truck measure.
Item no. 910940002
Wheelboard with stacking trays and entry for interlocking system. 4 x blue wheels (two with brakes). Load capacity 450 kg.
Item no. 80325XXX3
Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and NAC3MX-W device connectors.
Item no. 80325XXX2
Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and Schuko device connectors.
Item no. 80205XXX5
XLR signal cable in different lengths with Neutrik connectors NC3FXX-B and B-NC3MXX, black housing and gold-plated contacts. Large wire diameter of 2 x 0,5 sq mm with 28 x 0.15 sq mm copper per core, 100 % shielding due to dense copper spiral turner and metallised fleece.