SubSat-LA Set

Plug & Play Satellite System

  • 1 x HDSP-3 amplifier
  • 4 x LA-Stick 4x4
  • 2 x Carrying bag for up to 2 x LA-Stick 4x4
  • 2 x Spindle mechanics for LA-Stick 4x4
  • 2 x Inclinable Stand Adapter
  • 2 x Paveosub-112 with detachable front-wheel board, transport cover
  • 2 x M20 Speaker rod »Ring Lock«
  • 4 x Cable clamps
  • 1 x Carrying bag for 2 x telescopic distance rods without crank
  • 2 x 10 m, 2 x 3 m Speakon cable (4 x 4 qmm)
  • 2 x 0,55 m Speakon cable (2 x 2,5 qmm)

HDSP-3

Quantity channel
3 CH, class-D latest generation

Power output 4 Ω
4.000 W (1 x 2.400 W + 2 x 800 W)

Power output 8 Ω
2.480 W (1 x 1.580 W+ 2 x 450 W)

Power output 16 Ω
1.200 W (1 x 800 W+ 2 x 200 W)

Damping factor
> 1000 / 8 Ω, 1 kHz

Frequency responce
20 - 20.000 Hz

THD+N
< 0,05 % (20 - 20.000 Hz with 8 Ω)

Signal-to-noise ratio
> 118 dB (20 - 20.000 Hz with 8 Ω)

Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 - 135 V = 110 / 115 / 120 V Betrieb, 190 - 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz

Powerconnector
1 x 16 A Neutrik PowerCon IN

Signal connection analog INPUT/LINK
2 x XLR female/male

Speaker Connections
2 x Speakon

Network connection
1 x Additional rear RJ45 socket for wired network in fixed installations

Cooling
2 x temperature-controlled EBM-Papst low noise axial fan, air flow front to back

Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors

Realtime software-monitoring
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from each ampmodule
Real time meterbridge on PC per channel
Real time access for configuration on each channel
Speaker group building for access multiple speakers with one command

DSP sampling
64 bit, 96 kHz sample rate

DSP preset memory quantity
80 preset locations

Latency
0 - max. 500 microsecond

Dynamic range input
120 db

Nominal input level
+ 6 dbu

Maximum input level
+ 23 dbu

Limiter
Two per way, in each input and output

Filter
10 parametric filter each in- and output, use as Bell, Shelving, Notch, or Allpass filter

Long delay section
0 - 800 ms (max. 275 m delay) in each input

Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers

Phase adjustment
0 - 180°

X-Over
Butterworth, Bessel, Linkwitz-Riley Filter

Software
Bi-directional realtime VA-WLAN-remote network, software for PC and MAC

Manual hand operation
with 2 x button and 1 x digital encoder-wheel in the internal menu navigation, function lockable

Display
1 x LED display
1 x LCD display with software dimmable and switchable

Body housing
19"/2 HE, 430 mm deep, strong black colored aluminum housing

Weight
4,1 kg

LA-Stick 4x4

Speaker drivers
4 x 4" Neodym wideband transducer with 0,75" voice coil, waterproof

System
Line array stick

Frequency range
161 Hz - 18 kHz (- 10 dB)
210 Hz - 15,4 kHz (+/- 3 dB)

Coverage range (h x v)
70° horizontal, vertical directivity is controlled by the angle between the elements

Impedance
16 Ω

Powerhandling 16 Ω
120 W AES / 240 W programm / 480 W peak

Sensitivity dB SPL 1 W/1 m
96 dB SPL

Sound pressure at (AES / programm / peak)
116 dB SPL / 119 dB SPL / 122 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN/OUT (loop through), configuration: 1+/1-

Mounting
Flying vertical by clickable mechanics and perforated rail for setting up emphasis
Several elements among each other connect- and adjustable rear threaded mechanics (without any help of tools)
2 x M6 rear bolt-flange mounting for stand and distance rod operation
Bolt-flange mounting 1 x M10 for tripod mounting poles and operating on the bottom
Tilt adapter in various angle, instead of rear threaded mechanics
Swivel bracket with raster for the fitting on the floor
Swivel bracket with raster for top spots on bass and fixation in M20 flange

Housing
15 and 12 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days.

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 5 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
419 (h) x 119 (w) x 160 mm (d) / 3,2 kg

Paveosub-112

Speaker drivers
1 x 12" Neodym long excursion woofer (LF) with 4" voice coil, cone waterproof treatment

System
compact and flat bass reflex subwoofer

Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)

Coverage range (h x v)
Omnidirectional

Impedance
8 Ω active separated

Powerhandling LF 8 Ω
1.000 W AES, 2.000 W programm, 4.000 W peak

Sensitivity dB SPL 1 W/1 m
96 dB SPL (half space)

Sound pressure at (AES / programm / peak)
126 dB SPL / 129 dB SPL / 132 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN/OUT, 2+/- LF

Handles
2 x shell type handle

Foot
8, each 4 x on a flat and narrow side with opposite stacking trays

Fittings
2 x M20 pole mount
2 x latches on the front for detachable wheelboard

Housing
30 and 15 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
300 (h) x 520 (w) x 485 mm (d) / 23,1 kg