SubSat-4sp Set

Plug & Play Satellite System Self-Powered

  • 2 x Alea-4 with u-bracket
  • 1 x Paveosub-112sp with detachable front-wheel board, transport cover
  • 2 x Alea-4 stand with round base, adjustable from 1,100 to 1,700 mm
  • 1 x Reducing thread M20 x 1.25 mm for Alea-4 stand
  • 1 x Carrying bag for 3 x Alea-4 stand with round base
  • 1 x 10 m, 1 x 3 m Speakon cable (4 x 4 qmm)

Alea-4

Speaker drivers
4 x 4" Neodym wideband transducer with 0,75" voice coil, waterproof

System
Line array stick

Frequency range
161 Hz - 18 kHz (- 10 dB)
210 Hz - 15,4 kHz (+/- 3 dB)

Coverage range (h x v)
70° horizontal, vertical directivity is controlled by the angle between the elements

Impedance
16 Ω

Powerhandling 16 Ω
120 W AES / 240 W programm / 480 W peak

Sensitivity dB SPL 1 W/1 m
96 dB SPL

Sound pressure at (AES / programm / peak)
116 dB SPL / 119 dB SPL / 122 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN/OUT (loop through), configuration: 1+/1-

Mounting
Flying vertical by clickable mechanics and perforated rail for setting up emphasis
Several elements among each other connect- and adjustable rear threaded mechanics (without any help of tools)
2 x M6 rear bolt-flange mounting for stand and distance rod operation
Bolt-flange mounting 1 x M10 for tripod mounting poles and operating on the bottom
Tilt adapter in various angle, instead of rear threaded mechanics
Swivel bracket with raster for the fitting on the floor
Swivel bracket with raster for top spots on bass and fixation in M20 flange

Housing
15 and 12 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days.

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 5 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
419 (h) x 119 (w) x 160 mm (d) / 3,2 kg

Paveosub-112sp

Speaker drivers
1 x 12" Neodym long excursion woofer (LF) with 4" voice coil, cone waterproof treatment

System
compact and flat bass reflex subwoofer

Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)

Coverage range (h x v)
Omnidirectional

Impedance
8 Ω active separated

Powerhandling LF 8 Ω
1.000 W AES, 2.000 W programm, 4.000 W peak

Sensitivity dB SPL 1 W/1 m
96 dB SPL (half space)

Sound pressure at (AES / programm / peak)
126 dB SPL / 129 dB SPL / 132 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN/OUT, 2+/- LF

Handles
2 x shell type handle

Foot
8, each 4 x on a flat and narrow side with opposite stacking trays

Fittings
2 x M20 pole mount
2 x latches on the front for detachable wheelboard

Housing
30 and 15 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
300 (h) x 520 (w) x 485 mm (d) / 28,8 kg

Integrated 3-Way Amplifier Modul

Amplifier
3rd Generation Class D

Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω, 800 W/16 Ω

Power output CH2 and CH3
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω

Amplifier gain
CH1 32 dB, CH2/3 26 dB

Signal-to-noise ratio
> 120 dB (20 - 20.000 Hz, 8 Ω)

Damping factor
> 1.000 (8 Ω, 1 kHz)

Distortion
THD+N < 0,05 % (20 - 20.000 Hz, 8 Ω)

Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors

Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 - 135 V = 110 / 115 / 120 V Betrieb, 190 - 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz

Integrated Loudspeaker Management System (DSP-Board)

Manual hand operation
2 button and 1 x digital encoder-wheel for the internal menu navigation, function lockable

Operable language
Selectable between English, German, France, Spain

Softwareconnection, bi-directional
USB, Ethernet

Controllable units about software
Up to 128 self-powered loudspeaker and HDSP-amplifier in one network

Realtime software-monitoring for PC and MAC
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from the ampmodule
Real time meterbridge on PC per channel
Real time access for configuration
Speaker group building for access multiple speakers with one command
Display with software dimmable and switchable out
Standby switchable
Konfiguration und real-time monitoring über VA-WLAN Remotesoftware für PC und Mac

DSP preset memory quantity
80 Presets

Processor
64 bit, 96 kHz sample rate

Dynamic range input
120 dB

Maximum input level
+ 23 dB

Latency
0 - max. 500 microsecond

Routing
2-input signals can mix together in one loudspeaker

EQ filter
10 parametric filter each in- and output (20), use as Bell, Shelving, Notch, or Allpass filter

X-Over
Butterworth, Bessel, Linkwitz-Riley

Limiter
In each input and output, the user have no access on the ouput limiter (components protection)

Long delay section
0 up to 800 ms (max. 275 m delay) in each input for the user

Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers

Phase adjustment
0 - 180°