Ikarray-12 Set

Line-Array System

  • 3 x HDSP-6 with each 1,5 m powerCON/Schuko cable
  • 8 x Ikarray-12 bi-amping
  • 2 x Rigging frame for Ikarray-12
  • 4 x Paveosub-218

Cover for Paveosub-218 (sp)

Transport and rain cover for Paveosub-218 (sp), stable Cordura fabric with padding, all handles and connections are cut.

Detachable wheelboard

Detachable wheelboard

Detachable wheelboard to mount on Paveosub-218 (sp), 15 mm wood with polyurea coating, stackable, 2 butterfly locks, 4 handles, 4 blue wheels with brakes, engraved logo.

Castor set

Castor set

Castor set for permanent installation at the back, consisting of 4 x Blue Wheels 100 x 36 mm with brakes. Including 16 x mounting screws M8 x 30 mm galvanized.

Ikarray-12 Cover

Ikarray-12 Cover

Transport and rain cover for four Ikarray-12 in Groundstacking, stable Cordura fabric with padding, all handles and connections are cut.

Dolly Ikarray-12

Dolly for transport of up to 4 x Ikarray-12, with mounting mechanics and braked 100 mm castors.

Ikarray-12 Stackboard

Stackboard for the installation of up to 4 x Ikarray-12 on a Paveosub-218, with fixing mechanism.

Rigging frame

Frame for suspending the Ikarray-12 line array system. Can also be used in groundstacking.

Outriggers for rigging frame

Two Outriggers for proper leveling and aligning the rigging frame for ground stacking without subwoofers.

LAP-TEQ Clinometer

LAP-TEQ Clinometer

Device for precise positioning of line arrays. The set consists of a display module and two sensor modules with a resolution of 0.01° within an angle of +/- 40°.

Digital dual axis angle protractor

Digital dual axis angle protractor with a resolution of 0.01°. The device has an audible signal when the desired inclination. By magnetic feet at the 4 corners, the unit can be mounted either at the rigging frame or directly on the front grille of the loadspeaker.

Easyfly-Mechanics

Tool-free flight mechanics for clicking and exact alignment of the speaker in the horizontal and vertical axis. Removable recording for example the self-lock clamp included.

Universal suspension arrangement for flight mechanics

Universal suspension arrangement for flight mechanics

For mounting the Easyfly and Flight Mechanics LA-Stick 4x4 by means of chains on very high ceilings, where it is not possible to fix it with heavy-duty anchors.

PD-32-6

19"/3 HE intelligent 32A power distributor, suitable for applications in temporary and permanent installations. 32 A CEE Input, 6 x Schuko Output in parallel 6 x Neutrik Powercon Output, 1 x 16 A CEE, 6 x independent circuits (RCBO) and precise multi meter.

3HE Stackrack

3HE/19" flight case for HDSP-12 amplifier and PD-32-6 power distributor. The cases can be stacked without slipping and connect via an internal mechanism to form a tower. The coupling with a wheelboard is done in the same way. In addition, the racks are equipped with retractable cover and shock absorbing rack rails. 60 cm Packing size = truck measure.

2HE Stackrack

2HE/19" flight case for all HDSP-amplifier with body housing 19"/2HE. The cases can be stacked without slipping and connect via an internal mechanism to form a tower. The coupling with a wheelboard is done in the same way. In addition, the racks are equipped with retractable cover and shock absorbing rack rails. 60 cm Packing size = truck measure.

Wheelboard for stackrack systems

Wheelboard for stackrack systems with stacking trays and entry for interlocking system. 4 x blue wheels (two with brakes). Load capacity 450 kg.

Speakonsplitbox 4CH

The Speakonsplitbox 4CH distributed four amplifier channels to four single Speakon 1 +/- and two double allocation Speakon 1 +/-, 2 +/-. Multipin male input and female output connectors.

Speakonsplit 4CH

4CH Speakonsplit cable, amplifier side, 4 x 2 x 2.5 sq mm cable whip (8 wires = 4 channels). To 4 amplifier channels of the HDSP amplifiers over longer distances have to be routed in a Speakercore together and lay any single wires. The wire 140 x 0.15 copper. 4 x Speakon 2-fold is on female multipin connector.

Speakercore 4CH 5/10/20/25 m

Speakercore in various lengths with 8 x 4 sq mm wire = 4 channels. Highly flexible, robust, accessible. 224 x 0.15 copper per wire, the special jacket surface assumes little dirt and is easy to clean. Temperature range -25°/+70°, even cold yet flexible. Multipin input and output.

Speakon 0.5/1/3/6/10/15/20/30 m

Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

Speakonadapter

Speakonadapter to connect two speaker cables.

powerCON TRUE1 3/6/10/15/20/30/50 m

powerCON TRUE1 3/6/10/15/20/30/50 m

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and NAC3MX-W device connectors.

powerCON TRUE1-Schuko 3/6/10/15/20/30/50 m

powerCON TRUE1-Schuko 3/6/10/15/20/30/50 m

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and Schuko device connectors.

XLR signal cable 0,5/3/6/10/15/20/30/50 m

XLR signal cable in different lengths with Neutrik connectors NC3FXX-B and B-NC3MXX, black housing and gold-plated contacts. Large wire diameter of 2 x 0,5 sq mm with 28 x 0.15 sq mm copper per core, 100 % shielding due to dense copper spiral turner and metallised fleece.