Ikarray-8 Set

Plug & Play Sound System

  • 1 x HDSP-6 amplifier
  • 2 x Ikarray-8 /100° x 15°
  • 2 x Ikarray-8 /100° x 5°
  • 2 x 2-in-1 flight and tripod mechanics, Tripod transducer, Self lock clamp and Safety 6/1000
  • 4 x Paveosub-118 with detachable front-wheel board, transport & rain cover
  • 2 x M20 rod with crank and »Ring Lock«
  • 4 x Cable clamps
  • 1 x Carrying bag for 2 x speaker stand/speaker rod
  • 2 x 15 m, 4 x 10 m, 2 x 3 m Speakon cable (4 x 4 qmm)

HDSP-6A/6D

Quantity channel
6 CH, class-D latest generation

Power output 4 Ω
8.000 W (2 x 2.400 W + 4 x 800 W)

Power output 8 Ω
4.960 W (2 x 1.580 W + 4 x 450 W)

Power output 16 Ω
2.400 W (2 x 800 W + 4 x 200 W)

Damping factor
> 1000 / 8 Ω, 1 kHz

Frequency responce
20 - 20.000 Hz

THD+N
< 0,05 % (20 - 20.000 Hz with 8 Ω)

Signal-to-noise ratio
> 118 dB (20 - 20.000 Hz with 8 Ω)

Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 - 135 V = 110 / 115 / 120 V Betrieb, 190 - 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz

Powerconnector
1 x 16 A Neutrik PowerCon IN

Signal connection analog INPUT/LINK
4 x XLR female/male

Speaker Connections
4 x Speakon

Network connection
2 x Additional rear RJ45 socket for wired network in fixed installations

Cooling
2 x temperature-controlled EBM-Papst low noise axial fan, air flow front to back

Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors

Realtime software-monitoring
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from each ampmodule
Real time meterbridge on PC per channel
Real time access for configuration on each channel
Speaker group building for access multiple speakers with one command

DSP sampling
64 bit, 96 kHz sample rate

DSP preset memory quantity
2 x 80 preset locations, including 2 different presets assignable simultaneously

Latency
0 - max. 500 microsecond

Dynamic range input
120 db

Nominal input level
+ 6 dbu

Maximum input level
+ 23 dbu

Limiter
Two per way, in each input and output

Filter
10 parametric filter each in- and output, use as Bell, Shelving, Notch, or Allpass filter

Long delay section
0 - 800 ms (max. 275 m delay) in each input

Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers

Phase adjustment
0 - 180°

X-Over
Butterworth, Bessel, Linkwitz-Riley Filter

Software
Bi-directional realtime VA-WLAN-remote network, software for PC and MAC

Manual hand operation
with 4 x button and 2 x digital encoder-wheel in the internal menu navigation, function lockable

Display
2 x LED display
2 x LCD display with software dimmable and switchable

Body housing
19"/2 HE, 430 mm deep, strong black colored aluminum housing

Weight
7,2 kg

Ikarray-8

Speaker drivers
2 x 8" Neodym LF with 65 mm (2,5") voice coil
4 x 1" Neodym compression driver with 44 mm (1,75") voice coil

System
Plug&Play Line-Array with passive crossover

Frequency range 15°
80 Hz - 18 kHz (- 10 dB)
117 Hz - 16 kHz (+/- 3 dB)

Frequency range
80 Hz - 19 kHz (- 10 dB)
117 Hz - 16 kHz (+/- 3 dB)

Coverage range (h x v)
100° x 15° or 100° x 5° depending on the housing version

Powerhandling 4 Ω
500 W AES / 1.000 W programm / 2.000 W peak

Sensitivity dB SPL 1 W/1 m
15° : 104 dB SPL
5° : 106 dB SPL

Sound pressure at (AES / programm / peak)
15° : 131 dB SPL / 134 dB SPL / 137 dB SPL
5° : 133 dB SPL / 136 dB SPL / 139 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN and OUT, 1+/1-

Handles
4 x shell type handle

Mounting
Toolless flight mechanics with tripod option

Housing
12 and 15 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
Optional for fixed installations: other surface colors according to RAL-tones can be provided by Warnex structure paint

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
465 (h) x 513 (w) x 291 mm (d) / 26,2 kg

Paveosub-118

Speaker drivers
1 x 18" Neodym long excursion woofer (LF) with 4" voice coil, cone waterproof treatment

System
compact bass reflex subwoofer

Lower cut-off frequency
33 Hz (- 10 dB)
39 Hz (- 3 dB

Coverage range (h x v)
Omnidirectional

Impedance
8 Ω active separated

Powerhandling LF 8 Ω
1.200 W AES / 2.400 W programm / 4.800 W peak

Sensitivity dB SPL 1 W/1 m
100 dB SPL (half space)

Sound pressure at (AES / programm / peak)
131 dB SPL / 134 dB SPL / 137 dB SPL

Connectors
4 x Neutrik NL4 Speakon IN/OUT, 2+/- LF

Handles
6 x shell type handle

Foot
4 x with opposite stacking trays

Fittings
1 x M20 pole mount
2 x latches on the front for detachable wheelboard

Housing
24 and 15 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
540 (h) x 540 (w) x 740 mm (d) / 41 kg