Ikarray-8sp Set

Plug & Play Sound System Self-Powered

  • 2 x Ikarray-8 /100° x 15°
  • 2 x Ikarray-8 /100° x 5°
  • 2 x 2-in-1 flight and tripod mechanics, Tripod transducer, Self lock clamp and Safety 6/1000
  • 2 x Paveosub-118 with detachable front-wheel board, transport & rain cover
  • 2 x Paveosub-118sp with detachable front-wheel board, transport & rain cover
  • 2 x M20 rod with crank and »Ring Lock«
  • 4 x Cable clamps
  • 1 x Carrying bag for 2 x speaker stand/speaker rod
  • 2 x 15 m, 2 x 10 m, 2 x 3 m Speakon cable (4 x 4 qmm)

Ikarray-8

Speaker drivers
2 x 8" Neodym LF with 65 mm (2,5") voice coil
4 x 1" Neodym compression driver with 44 mm (1,75") voice coil

System
Plug&Play Line-Array with passive crossover

Frequency range 15°
80 Hz - 18 kHz (- 10 dB)
117 Hz - 16 kHz (+/- 3 dB)

Frequency range
80 Hz - 19 kHz (- 10 dB)
117 Hz - 16 kHz (+/- 3 dB)

Coverage range (h x v)
100° x 15° or 100° x 5° depending on the housing version

Powerhandling 4 Ω
500 W AES / 1.000 W programm / 2.000 W peak

Sensitivity dB SPL 1 W/1 m
15° : 104 dB SPL
5° : 106 dB SPL

Sound pressure at (AES / programm / peak)
15° : 131 dB SPL / 134 dB SPL / 137 dB SPL
5° : 133 dB SPL / 136 dB SPL / 139 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN and OUT, 1+/1-

Handles
4 x shell type handle

Mounting
Toolless flight mechanics with tripod option

Housing
12 and 15 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
Optional for fixed installations: other surface colors according to RAL-tones can be provided by Warnex structure paint

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
465 (h) x 513 (w) x 291 mm (d) / 26,2 kg

Paveosub-118sp

Speaker drivers
1 x 18" Neodym long excursion woofer (LF) with 4" voice coil, cone waterproof treatment

System
compact bass reflex subwoofer

Lower cut-off frequency
33 Hz (- 10 dB)
39 Hz (- 3 dB

Coverage range (h x v)
Omnidirectional

Impedance
8 Ω active separated

Powerhandling LF 8 Ω
1.200 W AES / 2.400 W programm / 4.800 W peak

Sensitivity dB SPL 1 W/1 m
100 dB SPL (half space)

Sound pressure at (AES / programm / peak)
131 dB SPL / 134 dB SPL / 137 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN/OUT, 2+/- LF

Handles
6 x shell type handle

Foot
4 x with opposite stacking trays

Fittings
1 x M20 pole mount
2 x latches on the front for detachable wheelboard

Housing
24 and 15 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
540 (h) x 540 (w) x 740 mm (d) / 45,8 kg

Integrated 3-Way Amplifier Modul

Amplifier
3rd Generation Class D

Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω, 800 W/16 Ω

Power output CH2 and CH3
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω

Amplifier gain
CH1 32 dB, CH2/3 26 dB

Signal-to-noise ratio
> 120 dB (20 - 20.000 Hz, 8 Ω)

Damping factor
> 1.000 (8 Ω, 1 kHz)

Distortion
THD+N < 0,05 % (20 - 20.000 Hz, 8 Ω)

Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors

Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 - 135 V = 110 / 115 / 120 V Betrieb, 190 - 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz

Integrated Loudspeaker Management System (DSP-Board)

Manual hand operation
2 button and 1 x digital encoder-wheel for the internal menu navigation, function lockable

Operable language
Selectable between English, German, France, Spain

Softwareconnection, bi-directional
USB, Ethernet

Controllable units about software
Up to 128 self-powered loudspeaker and HDSP-amplifier in one network

Realtime software-monitoring for PC and MAC
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from the ampmodule
Real time meterbridge on PC per channel
Real time access for configuration
Speaker group building for access multiple speakers with one command
Display with software dimmable and switchable out
Standby switchable
Konfiguration und real-time monitoring über VA-WLAN Remotesoftware für PC und Mac

DSP preset memory quantity
80 Presets

Processor
64 bit, 96 kHz sample rate

Dynamic range input
120 dB

Maximum input level
+ 23 dB

Latency
0 - max. 500 microsecond

Routing
2-input signals can mix together in one loudspeaker

EQ filter
10 parametric filter each in- and output (20), use as Bell, Shelving, Notch, or Allpass filter

X-Over
Butterworth, Bessel, Linkwitz-Riley

Limiter
In each input and output, the user have no access on the ouput limiter (components protection)

Long delay section
0 up to 800 ms (max. 275 m delay) in each input for the user

Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers

Phase adjustment
0 - 180°