TS-212

  • 2 x 12"/1 x 1,4" hybrid high-performance top unit
  • Radiation exchange with horns 90 x 50° or 60 x 40°
  • World's smallest: 680 (h) x 380 (w) x 400 mm (d)
  • Best sound pressure-weight ratio
  • World's lightest: 27 kg

U-Bracket

Item no. 402121001

U-Bracket for TS-212. Is attached to the side using the enclosed M10 screws. To hang or closer alignment on a stand/distance rod. Supplied without traverse clamp or stand adapter.

Self-lock clamp

Item no. 999950731

Self-lock clamp for mounting on TS-212 U-bracket. The speakers can thus be flown by one person, a hook equal to the truss and can be easily tighten. 250 kg load capacity, with self-locking M10 screw.

TV pin

Item no. 999924519

TV pin 28 mm for mounting on TS-212 U-bracket. When frequent changes between flight and tripod use needs to be vice screwed on TS-212 U-bracket no hardware. The TV pin can be used to flight operation in a matter of seconds in the "TV pin self-lock clamp" and tripod use in the "TV pin stand adapter" are inserted.

Self-lock clamp with tv-pin entry

Item no. 999958241

Self-lock clamp with 28 mm tv-pin entry.

Tv-pin stand adapter

Item no. 999966350

Adapter for a 28 mm tv pin on a 35 mm speaker stand.

Wall holder flex

Item no. 999924120

Stable wall holder with tilt and swivel orientation: 180° horizontal, 22° vertical adjustable in 11 steps, expanding mandrel for play-free seating in the tripod base of the speaker. Carrying capacity 50 kg.

Safety cable

Item no. 999963100

1 m safety cable 6 mm Ø for securing a suspended loudspeaker. One side with a quick link.

Eye Bolt

Item no. 999917370

M10 x 40 mm eye bolt is screwed into rearward mounting point and the speaker can also be secured directly to the housing with a safety cable.

Speaker stand crank

Item no. 999921300

Stable speaker stand for cranks with 50 kg load capacity and double protection against falling. Height: 139 to 218 cm.

Speaker stand

Item no. 999921467

Stable speaker stand for extraction with 50 kg load capacity, double protection against falling. Expanding mandrel system which provides a tight and firm fit for the speaker. Height: 132 to 220 cm.

Speaker rod crank

Item no. 999921340

Speaker rod crank with 50 kg load capacity and expanding mandrel system for play-free seating in the tripod base of the speaker. Height: 92 to 152 cm

Speaker rod

Item no. 999921368

Speaker rod with 35 kg load capacity and expanding mandrel system for play-free seating in the tripod base of the speaker. Height: 110 to 180 cm

Carrying bag for 2 x speaker stand/speaker rod

Carrying bag for 2 x speaker stand/speaker rod

Item no. 999920000

Carrying bag for two speaker stands or distance rods with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.

Carrying bag for 2 x telescopic distance rods

Carrying bag for 2 x telescopic distance rods

Item no. 999921000

Extremely robust, padded carrying bag for two telescopic distance rods without crank, with two carrying straps and zippers. The padded partition wall protects the two distance rods from scratching. The floor and all load points are reinforced. Made of easy-care water-repellent nylon.

Speakon 0.5/1/3/6/10/15/20/30 m

Item no. 80440XXX1

Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

Speakonadapter

Item no. 999654669

Speakonadapter to connect two speaker cables.

1.4" Horn 60° x 40°

Item no. 999991464

1.4" removable horn with 60° x 40° radiation, rotated at 40° x 60°. Stable cast aluminium thus not cancel the driver unit possible. Through the bi-amping concept can select the appropriate preset for different horns and change at any time in the HDSP amplifiers and self-powered subwoofers.

1.4" Horn 90° x 50°

Item no. 999991495

1.4" removable horn with 90° x 50° radiation, rotated at 50° x 90°. Stable cast aluminium thus not cancel the driver unit possible. Through the bi-amping concept can select the appropriate preset for different horns and change at any time in the HDSP amplifiers and self-powered subwoofers.

1.4" Driver unit 60° x 40°

Item no. 999141464

1.4" removable horn and high-frequency driver with 60° x 40° radiation, rotated at 40° x 60°. Saves in frequent changes of horns dismantling the high-frequency driver.

1.4" Driver unit 90° x 50°

Item no. 999141495

1.4" removable horn and high-frequency driver with 90° x 50° radiation, rotated at 50° x 90°. Saves in frequent changes of horns dismantling the high-frequency driver.