SubSat-15sp Set

Plug & Play Sound System Self-Powered

  • 2 x Modular-15sp bi-amping with transport & rain cover
  • 2 x Paveosub-118 with detachable front-wheel board, transport & rain cover
  • 2 x Paveosub-118sp with detachable front-wheel board, transport & rain cover
  • 2 x M20 rod with crank and »Ring Lock«
  • 4 x Cable clamps
  • 1 x Carrying bag for 2 x speaker stand/speaker rod
  • 2 x 3 m Speakon cable (4 x 4 qmm)

Cover for Paveosub-118 (sp)

Item no. 501181000

Transport and rain cover for Paveosub-118 (sp), stable Cordura fabric with padding, all handles and connections are cut.

Detachable wheelboard

Detachable wheelboard

Item no. 501184000

Detachable wheelboard to mount on Paveosub-118 (sp), 15 mm wood, stackable, 2 butterfly locks, 2 handles, 4 blue wheels, engraved logo.

Cover for Modular-15

Item no. 501501100 | 501501200

Transport and rain cover for Modular-15 (sp), stable Cordura fabric with padding, all handles and connections are cut. The front can be folded to the side, behind it there is a sound-permeable gases as rain protection for outdoor applications.

Double case for Modular-15

Double case for Modular-15

Item no. 500153000

Heavy-Duty Flightcase for up to two Modular-15/15sp with compartments for Easyfly mechanism, self-lock clamp and safety cable. 4 blue wheels, 4 large butterflys, 8 large folding handles. 9 mm Wood with black scratch-resistant surface. Stable 35 x 35 mm edge profile 2.5 mm thick, 5 mm outside radius.

Easyfly-Mechanics

Item no. 999936000

Tool-free flight mechanics for clicking and exact alignment of the speaker in the horizontal and vertical axis.

Carrying bag for Easyfly-Mechanics

Carrying bag for Easyfly-Mechanics

Item no. 409992000

Carrying bag for up to two Easyfly-Mechanics heads with attached traverse clamp plus accessory compartment for two safetys with single studs.

Universal suspension arrangement for flight mechanics

Universal suspension arrangement for flight mechanics

Item no. 409992001

For mounting the Easyfly- and the flight-mechanism of the LA-Stick 4x4 by chains on very high ceilings, where a mounting with heavy duty anchors is not possible. U-bracket of the flight mechanics is not included.

Rotating double pipe clamp with aluminum pipe

Item no. 409992000

This construction allows you to mount two speakers of the Modular Series in a horizontal array and align them horizontally through the rotation axis of the double clamp.

Self-lock clamp

Item no. 999950731

Self-lock clamp for mounting on TS-212 U-bracket. The speakers can thus be flown by one person, a hook equal to the truss and can be easily tighten. 250 kg load capacity, with self-locking M10 screw.

Single stud

Item no. 999957450

Single stud for securing a loudspeaker with safety cable. Clicking in the back of the flight rail from the loutspeaker.

Double stud

Item no. 999957401

Double stud for suspending the loudspeaker without the Easyfly mechanics. Alignment by chains.

Chain fastener

Item no. 999908000

Chain fastener for single stud, stud or double safety.

Safety cable

Item no. 999963100

1 m safety cable 6 mm Ø for securing a suspended loudspeaker. One side with a quick link.

Eye Bolt

Item no. 999917370

M10 x 40 mm eye bolt is screwed into rearward mounting point and the speaker can also be secured directly to the housing with a safety cable.

Speaker stand crank

Item no. 999921300

Stable speaker stand for cranks with 50 kg load capacity and double protection against falling. Height: 139 to 218 cm.

Speaker stand

Item no. 999921467

Stable speaker stand for extraction with 50 kg load capacity, double protection against falling. Expanding mandrel system which provides a tight and firm fit for the speaker. Height: 132 to 220 cm.

Speaker rod crank

Item no. 999921340

Speaker rod crank with 50 kg load capacity and expanding mandrel system for play-free seating in the tripod base of the speaker. Height: 92 to 152 cm

Speaker rod

Item no. 999921368

Speaker rod with 35 kg load capacity and expanding mandrel system for play-free seating in the tripod base of the speaker. Height: 110 to 180 cm

Adapter with expanding mandrel systems for speaker stand with crank

Adapter with expanding mandrel systems for speaker stand with crank

Item no. 999921441

Adapter with expanding mandrel system to be placed on speaker stand for cranks, for play-free seating in the tripod base of the speaker.

Stand fork

Item no. 999924105

Stand fork for two loadspeakers, for tube diameter of 35 mm.

Carrying bag for 2 x speaker stand/speaker rod

Carrying bag for 2 x speaker stand/speaker rod

Item no. 999920000

Carrying bag for two speaker stands or distance rods with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.

Carrying bag for 2 x telescopic distance rods

Carrying bag for 2 x telescopic distance rods

Item no. 999921000

Extremely robust, padded carrying bag for two telescopic distance rods without crank, with two carrying straps and zippers. The padded partition wall protects the two distance rods from scratching. The floor and all load points are reinforced. Made of easy-care water-repellent nylon.

Wall holder flex

Item no. 999924120

Stable wall holder with tilt and swivel orientation: 180° horizontal, 22° vertical adjustable in 11 steps, expanding mandrel for play-free seating in the tripod base of the speaker. Carrying capacity 50 kg.

Wall- and Trussholder

Wall- and Trussholder

Item no. 999924150

Wall- and Trussholder with a joint and a tube clamp, circa 520 mm long. Load capacity 50 kg.

1.4" Horn 60° x 40°

Item no. 999991464

1.4" removable horn with 60° x 40° radiation, rotated at 40° x 60°. Stable cast aluminium thus not cancel the driver unit possible. Through the bi-amping concept can select the appropriate preset for different horns and change at any time in the HDSP amplifiers and self-powered subwoofers.

1.4" Horn 90° x 50°

Item no. 999991495

1.4" removable horn with 90° x 50° radiation, rotated at 50° x 90°. Stable cast aluminium thus not cancel the driver unit possible. Through the bi-amping concept can select the appropriate preset for different horns and change at any time in the HDSP amplifiers and self-powered subwoofers.

1.4" Driver unit 60° x 40°

Item no. 999141464

1.4" removable horn and high-frequency driver with 60° x 40° radiation, rotated at 40° x 60°. Saves in frequent changes of horns dismantling the high-frequency driver.

1.4" Driver unit 90° x 50°

Item no. 999141495

1.4" removable horn and high-frequency driver with 90° x 50° radiation, rotated at 50° x 90°. Saves in frequent changes of horns dismantling the high-frequency driver.

Speakon 0.5/1/3/6/10/15/20/30 m

Item no. 80440XXX1

Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

Speakonadapter

Item no. 999654669

Speakonadapter to connect two speaker cables.

PD-32-6

Item no. 999490010

19"/3 HE intelligent 32A power distributor, suitable for applications in temporary and permanent installations. 32 A CEE Input, 6 x Schuko Output in parallel 6 x Neutrik Powercon Output, 1 x 16 A CEE, 6 x independent circuits (RCBO) and precise multi meter.

3HE Stackrack

Item no. 910946003

3HE/19" flight case for HDSP-12 amplifier and PD-32-6 power distributor. The cases can be stacked without slipping and connect via an internal mechanism to form a tower. The coupling with a wheelboard is done in the same way. In addition, the racks are equipped with retractable cover and shock absorbing rack rails. 60 cm Packing size = truck measure.

Wheelboard for stackrack systems

Item no. 910940002

Wheelboard with stacking trays and entry for interlocking system. 4 x blue wheels (two with brakes). Load capacity 450 kg.

powerCON TRUE1 3/6/10/15/20/30/50 m

powerCON TRUE1 3/6/10/15/20/30/50 m

Item no. 80325XXX3

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and NAC3MX-W device connectors.

powerCON TRUE1-Schuko 3/6/10/15/20/30/50 m

powerCON TRUE1-Schuko 3/6/10/15/20/30/50 m

Item no. 80325XXX2

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and Schuko device connectors.

XLR signal cable 0,5/3/6/10/15/20/30/50 m

Item no. 80205XXX5

XLR signal cable in different lengths with Neutrik connectors NC3FXX-B and B-NC3MXX, black housing and gold-plated contacts. Large wire diameter of 2 x 0,5 sq mm with 28 x 0.15 sq mm copper per core, 100 % shielding due to dense copper spiral turner and metallised fleece.