The Modular-10 is a compact and powerful multifunctional loudspeaker with high-quality 10"/1" neodymium drivers and passive crossover.
The Modular series is extremely flexible and is innovative with its combination of array point source systems and multifunctional usable individual speakers. As well as its use as a single full-range speaker, with high performance head with bass support and high-performance monitor on stage, the Modular series also designed to be used with multiple units next to each other, in a horizontal array design.
Any interference and associated sound interruptions between the sound sources are reduced to a minimum by using special housing geometry, suitable for the narrower beam angle of the rotatable horn. Each horn works only in its defined sound directivity. This technique allows the user an even greater range of applications with only one speaker model and is registered at the Patent Office.
"Easyfly", (also registered with the Patent Office), is a new ‘one-click’ mechanism which allows tool-free hanging and precise alignment in a few seconds. The mechanism is more elegant and smaller than a conventional rigging brace. The Modular series is equipped with inconspicuous mounting rails on two sides of the housing. This means the speaker can be hung or flown upright or horizontally, using the ‘Easyfly’ mechanism. At the back is a third mounting rail for the compulsory safety cable.
For accurate alignment on a stand or mounting pole, the Modular series has an internal, tilting pole socket enabling and an adjustment of +/- 18° tilt.
The Modular-10 uses a 10" chassis of the latest generation and has been specifically designed for a clean, detailed midrange with a high, undistorted sound pressure. A particularly low moving mass (mms 31g) in conjunction with the extremely powerful neodymium driver (B/L factor 20) enable a very high sound pressure. The chassis can be driven hard, and heat dissipates optimally keeping the power compression low. The magnet system use ventilation openings in. The aluminum demodulation rings in the magnet system ensure low distortion.
The Modular-10 can be installed with the ‘Easyfly’ mechanics, via the rear mountable tilt and swivel wall mount, or the 8 internal M10 thread points with steel angles.
Array with Modular-10
The standard horn is 90° x 40°. If two Modular-10s are to be used side by side in an array, the horn must be rotated to avoid interference.
The Modular-10 is operated on one channel (800 W/4 Ω) of an HDSP amplifier. The woofer and tweeter is available in 8 Ω.
Two Modular-10 can be looped through with a 4-pole cable and operated in parallel by the same amplifier channel.
Up to 8 Modular-10 units can be connected passively to one HDSP-6. Up to four Modular-10 speakers can be connected passively to a self-powered subwoofer.