Ikarray-12sp

  • 12"/1,4" scalable line array, self-powered bi-amping
  • 2-channel 3,2 kW ampmodul
  • One self-powered Ikarray-12sp can power up to three Ikarray-12 bi-amping
  • Manual DSP control via display, buttons and encoders
  • Software control via USB or Ethernet interface
  • 80 internal Presets
  • EASE Focus 3 licensed
Ikarray-12 Cover

Ikarray-12 Cover

Transport and rain cover for four Ikarray-12 in Groundstacking, stable Cordura fabric with padding, all handles and connections are cut.

Dolly Ikarray-12

Dolly for transport of up to 4 x Ikarray-12, with mounting mechanics and braked 100 mm castors.

Ikarray-12 Stackboard

Stackboard for the installation of up to 4 x Ikarray-12 on a Paveosub-218, with fixing mechanism.

Rigging frame

Frame for suspending the Ikarray-12 line array system. Can also be used in groundstacking.

Outriggers for rigging frame

Two Outriggers for proper leveling and aligning the rigging frame for ground stacking without subwoofers.

LAP-TEQ Clinometer

LAP-TEQ Clinometer

Device for precise positioning of line arrays. The set consists of a display module and two sensor modules with a resolution of 0.01° within an angle of +/- 40°.

Digital dual axis angle protractor

Digital dual axis angle protractor with a resolution of 0.01°. The device has an audible signal when the desired inclination. By magnetic feet at the 4 corners, the unit can be mounted either at the rigging frame or directly on the front grille of the loadspeaker.

Easyfly-Mechanics

Tool-free flight mechanics for clicking and exact alignment of the speaker in the horizontal and vertical axis. Removable recording for example the self-lock clamp included.

Carrying bag for Easyfly-Mechanics

Carrying bag for Easyfly-Mechanics

Carrying bag for up to two Easyfly-Mechanics heads with attached traverse clamp plus accessory compartment for two safetys with single studs.

Universal suspension arrangement for flight mechanics

Universal suspension arrangement for flight mechanics

For mounting the Easyfly- and the flight-mechanism of the LA-Stick 4x4 by chains on very high ceilings, where a mounting with heavy duty anchors is not possible. U-bracket of the flight mechanics is not included.

Speakon 0.5/1/3/6/10/15/20/30 m

Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

Speakonadapter

Speakonadapter to connect two speaker cables.

powerCON TRUE1 3/6/10/15/20/30/50 m

powerCON TRUE1 3/6/10/15/20/30/50 m

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and NAC3MX-W device connectors.

powerCON TRUE1-Schuko 3/6/10/15/20/30/50 m

powerCON TRUE1-Schuko 3/6/10/15/20/30/50 m

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and Schuko device connectors.

XLR signal cable 0,5/3/6/10/15/20/30/50 m

XLR signal cable in different lengths with Neutrik connectors NC3FXX-B and B-NC3MXX, black housing and gold-plated contacts. Large wire diameter of 2 x 0,5 sq mm with 28 x 0.15 sq mm copper per core, 100 % shielding due to dense copper spiral turner and metallised fleece.