HDSP-3A/3D

  • 4.000 W, 1 x 2.400 W + 2 x 800 W an 4 Ω
  • 3 channel DSP amplifier with single-technology
  • 1 power supply, DSP-board and Class-D module
  • Integrated loudspeaker management systems (DSP) with audiophile sound quality
  • 80 preset locations
  • Software control via Ethernet interface (HDSP-3A also USB)
  • Intelligent wide-range switching power supplies with automatic worldwide voltage adjustment
  • Dust protected by modular upside-down board assembly
  • Very quiet, temperature controlled low-noise EBM Papst fan
  • Tough, road-ready, stable and yet light aluminum housing

PD-32-6

19"/3 HE intelligent 32A power distributor, suitable for applications in temporary and permanent installations. 32 A CEE Input, 6 x Schuko Output in parallel 6 x Neutrik Powercon Output, 1 x 16 A CEE, 6 x independent circuits (RCBO) and precise multi meter.

3HE Stackrack

3HE/19" flight case for HDSP-12 amplifier and PD-32-6 power distributor. The cases can be stacked without slipping and connect via an internal mechanism to form a tower. The coupling with a wheelboard is done in the same way. In addition, the racks are equipped with retractable cover and shock absorbing rack rails. 60 cm Packing size = truck measure.

2HE Stackrack

2HE/19" flight case for all HDSP-amplifier with body housing 19"/2HE. The cases can be stacked without slipping and connect via an internal mechanism to form a tower. The coupling with a wheelboard is done in the same way. In addition, the racks are equipped with retractable cover and shock absorbing rack rails. 60 cm Packing size = truck measure.

Wheelboard for stackrack systems

Wheelboard for stackrack systems with stacking trays and entry for interlocking system. 4 x blue wheels (two with brakes). Load capacity 450 kg.

Speakonsplitbox 4CH

The Speakonsplitbox 4CH distributed four amplifier channels to four single Speakon 1 +/- and two double allocation Speakon 1 +/-, 2 +/-. Multipin male input and female output connectors.

Speakonsplit 4CH

4CH Speakonsplit cable, amplifier side, 4 x 2 x 2.5 sq mm cable whip (8 wires = 4 channels). To 4 amplifier channels of the HDSP amplifiers over longer distances have to be routed in a Speakercore together and lay any single wires. The wire 140 x 0.15 copper. 4 x Speakon 2-fold is on female multipin connector.

Speakercore 4CH 5/10/20/25 m

Speakercore in various lengths with 8 x 4 sq mm wire = 4 channels. Highly flexible, robust, accessible. 224 x 0.15 copper per wire, the special jacket surface assumes little dirt and is easy to clean. Temperature range -25°/+70°, even cold yet flexible. Multipin input and output.

Speakon 0.5/1/3/6/10/15/20/30 m

Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

Speakonadapter

Speakonadapter to connect two speaker cables.

Powercon 3/6/10/15/20/30/50 m

Powercon cables in various lengths, Titanex H07RN-F 3 x 2.5 sq mm, flexible rubber cable, the special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

Powercon-Schuko 3/6/10/15/20/30/50 m

Cable with Schuko-IN and Powercon OUT in various lengths, Titanex H07RN-F 3 x 2.5 sq mm, flexible rubber cable, the special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

XLR signal cable 0,5/3/6/10/15/20/30/50 m

XLR signal cable in different lengths with Neutrik connectors NC3FXX-B and B-NC3MXX, black housing and gold-plated contacts. Large wire diameter of 2 x 0,5 sq mm with 28 x 0.15 sq mm copper per core, 100 % shielding due to dense copper spiral turner and metallised fleece.