The Modular-15sp has 2-way self-powered bi-amping speakers with top-notch 15"/ 1.4" neodym drivers, an internal 3.2 kW power amplifier module and the DSP loudspeaker management system with extensive features. The DSP has high computing power and all the standard controller functions.
The integrated amplifier and DSP blocks used are identical to the HDSP amplifier series and the VA-WLAN remote software. The Modular-15sp and Modular-15 are compatible and can operate together. They provide the same 100% performance, and the same control and monitoring software in a combined software network.
The Modular-15sp is a plug and play speaker. All required settings for different configurations are stored as factory presets in the internal memory. For best performance and reliability, simply select the corresponding preset on the Display for use as either, a stand-alone full-range speaker, or a top speaker with bass support, or a monitor on stage, or with multiple units flown in an array.
There are still a number of other features, options and access settings available for the experienced technician and professional audio user.
On the back is a special built-in Display button and Encoder control wheel. It is possible to access almost all the parameters without PC control and the functions can be locked and password protected. The Display has a 2-stage dimmer and can also be switched off completely to prevent unwanted stray light on, or beside, stages. By pressing a key or the encoder, the Display activates again.
The active electronics are convection cooled by a large heatsink and are maintenance free. No dust or moisture can be sucked or drawn in, making the Modular-15sp ideal for permanent installations. The robust cooling fins are amply rounded and have no sharp edges.
A Modular-15sp can feed a Modular-15 bi-amp via a 4 pin cable.
The woofer is designed in 8 Ω, 16 Ω in the compression driver.
For maximum flexibility the user can choose between two different beam angles 60° x 40° or 90° x 60°. An exchange of horns can be made by the bi-amping control yourself at any time. In the HDSP amplifiers series and the controller board of the self-powered subwoofer specific speaker settings are saved as presets for both viewing angle.
LF: 1 x 15" Neodym woofer with 4" voice coil
HF: 1 x 1,4" Neodym compression driver with 3" voice coil
Frequency range 60°
60 Hz - 17,6 kHz (- 10 dB)
130 Hz - 17 kHz (+/- 3 dB)
Frequency range 90°
58 Hz - 17,8 kHz (- 10 dB)
122 Hz - 16.5 kHz (+/- 3 dB)
Coverage range (h x v)
90° x 60° / 60° x 40° (interchangeable, rotatable and arrayable horns)
LF: 8 Ω
HF: 16 Ω
Powerhandling (AES / Program / Peak)
LF: 850 W / 1.700 W / 3.400 W
HF: 110 W / 220 W / 440 W
Sensitivity 1 W/1 m
LF: 100 db SPL
HF: 111 db SPL
Sound pressure at (AES / Program / Peak)
129 dB SPL / 132 dB SPL / 135 dB SPL
2 x NEUTRIK NL4 IN/OUT 1+/1- (4-pole looped-through)
Warnex textured paint RAL-9005, 2 coats, special colours also possible
Dimensions / Weight
698 (H) x 431 (W) x 368 mm (D) / 32,9 kg
3rd Generation Class D
Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω, 800 W/16 Ω
Power output CH2
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω
LF: 32 db, HF: 26 db
>120 db (A-rated, 20 - 20.000 Hz, 8 Ω)
>1.000 (8 Ω, 1 kHz)
THD+N < 0,05 % (20 - 20.000 Hz, 8 Ω)
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over voltage protection
DC protection of outputs
Input limiter, peak limiter
Temperature monitoring of the heatsink and transistors
Intelligent and regulated switching power supply with automatic voltage detection
Switching between 120/230 V 50/60 Hz, worldwide use
Voltage range: from 85 - 268 V
64 bit, 96 kHz sample rate
Controllable units about software
Up to 128 self-powered loudspeaker and HDSP-Amplifiers in one network
Dynamic range input
Input level Nominal / Maximal
+ 6 dBu / + 23 db
0 - max. 0,5 ms
2 input mixers allow flexible routing to each output
20 parametric EQ filters per path
each filter can be set as Bell, Shelving, Notch, or Allpass Filter
Butterworth, Bessel, Linkwitz-Riley
Per input and output
0 up to 800 ms (max. 275 m delay) in each input for the user
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers
Infinitely adjustable from 0° - 180°
English, German, France, Spain
Software update via Ethernet
Realtime monitoring for PC and MAC
Impedance measurement -monitoring of the connected drivers per output stage channel
Temperaturmessung der EndstufensektionTemperature measurement of the power amplifier section
Gruppenbildung zum gleichzeitigen Einstellen aller zusammengefassten LautsprechertypenGroup building for simultaneous setting of all combined speaker types
Dimmung und Abschaltung des DisplaysDimming and switching off the display
Standby-Schaltung des EndstufenmodulsStandby circuit of the power amplifier module
Passwortschutz mit Abstufung: Werkseinstellung / User-Ebene / KomplettschutzPassword protection with gradation: Factory setting / user level / complete protection
Transport and rain cover Modular-15
Item no. 501501100 | 501501200
Transport and rain cover for Modular-15 (sp), stable Cordura fabric with padding, all handles and connections are cut. The front can be folded to the side, behind it there is a sound-permeable gases as rain protection for outdoor applications.
Heavy-Duty Flightcase for Modular-15
Item no. 500153000
Heavy-Duty Flightcase for up to two Modular-15/15sp with compartments for Easyfly mechanism, self-lock clamp and safety cable. 4 blue wheels, 4 large butterflys, 8 large folding handles. 9 mm Wood with black scratch-resistant surface. Stable 35 x 35 mm edge profile 2.5 mm thick, 5 mm outside radius. Dimensions/Weight: 920 (h) x 408 (w) x 906 mm (d) / 39 kg.
Item no. 999936000
Tool-free flight-mechanics for clicking and exact alignment of the speaker in the horizontal and vertical axis. Removable recording for example the self-lock clamp included.
Carrying bag for Easyfly-Mechanics
Item no. 409992000
Carrying bag for up to two Easyfly-Mechanics with attached truss clamp plus accessory compartment for e.g. two safetys with single studs.
Item no. 999950731
Loudspeakers can be flown by one person with the self-lock clamp. The clamp hooks directly into the truss and can be easily tightened. Load capacity 250 kg.
Chain fastener for flight-mechanics
Item no. 409992001
For mounting the Easyfly mechanics, LA-Stick 4x4 flight mechanics and the flight and tripod mechanics of the Ikarray-8 Line Array by chains on very high ceilings, where mounting with heavy-duty anchors is not possible.
Rotating double pipe clamp with aluminum pipe
Item no. 409992000
With this construction you can mount two speakers from the Modular series in horizontal array.
Tilting and swivelling wall holder XL
Item no. 999924120
Stable wall holder with tilt and swivel orientation: 180° horizontal, 22° vertical adjustable in 11 steps. Expanding mandrel for play-free seating in the tripod base of the speaker. Max. load capacity: 50 kg.
Wall- and Trussholder
Item no. 999924150
Wall- and Trussholder with a joint and a tube clamp, circa 520 mm long. Max. load capacity: 50 kg.
Item no. 999957450
Single stud for securing a loudspeaker with safety cable.
Item no. 999957401
For hanging and aligning loudspeakers with chains.
Screwable quick connect
Item no. 999908000
Screwable quick connect member for e.g. single and double stud fittings or safetys.
Item no. 999963100
1 m safety cable 6 mm Ø for securing a suspended loudspeaker. One side with a screwable quick connect.
Speaker stand crank
Item no. 999921300
Stable stand for cranking with double protection against falling. Height: 139 to 218 cm. Max. load capacity: 50 kg.
Item no. 999921467
Stable stand with expanding mandrel system which provides a tight and firm fit for the speaker. Double protection against falling. Height: 132 - 220 cm. Max. load capacity: 50 kg.
Distance rod with crank
Item no. 999921340
Distance rod for cranking with expanding mandrel system which provides a tight and firm fit for the speaker. Height: 92 - 152 cm. Max. load capacity: 50 kg.
Item no. 999921368
Telescopic rod with expanding mandrel system for play-free seating in the tripod base. Height: 110 to 180 cm. Max. load capacity: 35 kg.
Item no. 999921441
Adapter for mounting on stands or speaker rods. With Expanding mandrel system which provides a tight and firm fit for the speaker.
Carrying bag for 2 x speaker stand/ rod with crank
Item no. 999920000
Carrying bag for two speaker stands or distance rods with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.
Carrying bag for 2 x telescopic distance rods
Item no. 999921000
Extremely robust, padded carrying bag for two telescopic distance rods without crank, with two carrying straps and zippers. The padded partition wall protects the two distance rods from scratching. The floor and all load points are reinforced. Made of easy-care water-repellent nylon.
1.4" Horn 60° x 40°
Item no. 999991464
1.4" removable horn with 60° x 40° radiation, rotated at 40° x 60°. Stable cast aluminium thus not cancel the driver unit possible. Through the bi-amping concept can select the appropriate preset for different horns and change at any time in the HDSP amplifiers and self-powered subwoofers.
1.4" Driver unit 60° x 40°
Item no. 999141464
1.4" removable horn and high-frequency driver with 60° x 40° radiation, rotated at 40° x 60°. Saves in frequent changes of horns dismantling the high-frequency driver.
1.4" Horn 90° x 60°
Item no. 999991495
1.4" removable horn with 90° x 60° radiation, rotated at 60° x 90°. Stable cast aluminium thus not cancel the driver unit possible. Through the bi-amping concept can select the appropriate preset for different horns and change at any time in the HDSP amplifiers and self-powered subwoofers.
1.4" Driver unit 90° x 60°
Item no. 999141495
1.4" removable horn and high-frequency driver with 90° x 60° radiation, rotated at 40° x 60°. Saves in frequent changes of horns dismantling the high-frequency driver.
Cable Clip for speaker stand/ rod
Item no. 999935000
The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.
speakON cable 0.5/1/3/6/10/15/20/30 m
Item no. 80440XXX1
Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.
Item no. 999654669
Adapter to connect two speaker cables.
XLR signal cable 0,5/3/6/10/15/20/30/50 m
Item no. 80205XXX5
XLR signal cable in different lengths with Neutrik connectors NC3FXX-B and B-NC3MXX, black housing and gold-plated contacts. Large wire diameter of 2 x 0,5 sq mm with 28 x 0.15 sq mm copper per core, 100 % shielding due to dense copper spiral turner and metallised fleece.
powerCON TRUE1 3/6/10/15/20/30/50 m
Item no. 80325XXX3
Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and NAC3MX-W device connectors.
powerCON TRUE1-Schuko 3/6/10/15/20/30/50 m
Item no. 80325XXX2
Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W and Schuko device connectors.