Paveosub-112sp DDA

  • 1 x 12" compact self powered bass reflex subwoofer
  • 3-channel 4 kW ampmodul: 1 x 2.400 W + 2 x 800 W at 4 Ω
  • Horizontally and vertically stackable
  • Bi-amping function
  • Manual control via display, push-button and encoder
  • Software control via Dante (Digital Audio Network Through Ethernet)
  • 120 internal Presets
  • World's flattest 12" bass with only 30 cm height
  • 1 x 6 m Schuko/powerCON TRUE1 cable

Speaker drivers
1 x 12" Neodym long excursion woofer (LF) with 4" voice coil, cone waterproof treatment

compact and flat bass reflex subwoofer

Lower cut-off frequency
35 Hz (- 10 dB)
41 Hz (- 3 dB)

Coverage range (h x v)

8 Ω active separated

Powerhandling LF 8 Ω
1.000 W AES, 2.000 W programm, 4.000 W peak

Sensitivity dB SPL 1 W/1 m
96 dB SPL (half space)

Sound pressure at (AES / programm / peak)
126 dB SPL / 129 dB SPL / 132 dB SPL

1 x 16 A powerCON TRUE1 IN/OUT

Signal connection digital
1 x Dante (Digital Audio Network Through Ethernet)
1 x Digital AES/EBU, AES67

Signal connection analog
2 x XLR female/male

Speaker Connections
2 x Neutrik NL4 Speakon IN/OUT, 2+/- LF

2 x shell type handle

8, each 4 x on a flat and narrow side with opposite stacking trays

2 x M20 pole mount
2 x latches on the front for detachable wheelboard

30 and 15 mm birch plywood CNC machine-splined and bolted

Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones can be provided in a matter of days

Front grille
Galvanized and powdered black honeycomb grille RAL 9005, 10 mm acoustic foam behind grille, front logo
RAL-tones are available as an option to the standard color as well as chrome, and, with or without foam
For ‘No-branding’ installations, the logo on the front grille can be removed without leaving any visible marks

Dimensions / Weight
300 (h) x 520 (w) x 485 mm (d) / 28,8 kg

Integrated 3-Way Amplifier Modul

3rd Generation Class D

Power output CH1
2.400 W/4 Ω, 1.580 W/8 Ω, 800 W/16 Ω

Power output CH2 and CH3
800 W/4 Ω, 450 W/8 Ω, 200 W/16 Ω

Amplifier gain
CH1 32 dB, CH2/3 26 dB

Signal-to-noise ratio
> 120 dB (20 - 20.000 Hz, 8 Ω)

Damping factor
> 1.000 (8 Ω, 1 kHz)

THD+N < 0,05 % (20 - 20.000 Hz, 8 Ω)

Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors

Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 - 135 V = 110 / 115 / 120 V Betrieb, 190 - 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz

Integrated Loudspeaker Management System (DSP-Board)

Manual hand operation
2 button and 1 x digital encoder-wheel for the internal menu navigation, function lockable

Operable language
Selectable between English, German, France, Spain

Software-Update via Ethernet

Controllable units about software
Up to 128 self-powered loudspeaker and HDSP-amplifier in one network

Realtime software-monitoring for PC and MAC
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from the ampmodule
Real time meterbridge on PC per channel
Real time access for configuration
Speaker group building for access multiple speakers with one command
Display with software dimmable and switchable out
Standby switchable
Konfiguration und real-time monitoring über VA-WLAN Remotesoftware für PC und Mac

DSP preset memory quantity
120 Presets

64 bit, 96 kHz sample rate

Dynamic range input
120 dB

Maximum input level
+ 23 dB

0 - max. 500 microsecond

2-input signals can mix together in one loudspeaker

EQ filter
10 parametric filter each in- and output (20), use as Bell, Shelving, Notch, or Allpass filter

Butterworth, Bessel, Linkwitz-Riley

In each input and output, the user have no access on the ouput limiter (components protection)

Long delay section
0 up to 800 ms (max. 275 m delay) in each input for the user

Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers

Phase adjustment
0 - 180°