Aleasub-10 Media Set

Plug & Play Satellite System

  • 1 x HDSP-3 amplifier
  • 2 x Alea-4 with u-bracket
  • 1 x Aleasub-10
  • 2 x Alea-4 stand with round base 27,5 cm, 3,4 kg, high 1.000 - 1.700 mm
  • 1 x Reducing thread M20 x 1.25 mm for Alea-4 stand
  • 2 x 10 m, 1 x 3 m Speakon cable (4 x 4 qmm)

HDSP-3

Quantity channel
3 CH, class-D latest generation

Power output 4 Ω
4.000 W (1 x 2.400 W + 2 x 800 W)

Power output 8 Ω
2.480 W (1 x 1.580 W+ 2 x 450 W)

Power output 16 Ω
1.200 W (1 x 800 W+ 2 x 200 W)

Damping factor
> 1000 / 8 Ω, 1 kHz

Frequency responce
20 - 20.000 Hz

THD+N
< 0,05 % (20 - 20.000 Hz with 8 Ω)

Signal-to-noise ratio
> 118 dB (20 - 20.000 Hz with 8 Ω)

Voltage
Intelligent PFC wide-range power supply with soft start and automatic voltage selection:
85 - 135 V = 110 / 115 / 120 V Betrieb, 190 - 265 V = 220 / 230 / 240 V Betrieb, 50/60 Hz

Powerconnector
1 x 16 A Neutrik PowerCon IN

Signal connection analog INPUT/LINK
2 x XLR female/male

Signal connection digital AES/EBU INPUT/LINK
1 x XLR female/male (only HDSP-3D)

Speaker Connections
2 x Speakon

Network connection
1 x Additional rear RJ45 socket for wired network in fixed installations (only HDSP-3A)
1 x Additional rear DSP-LAN socket for wired network in fixed installations (only HDSP-3D)

Cooling
2 x temperature-controlled EBM-Papst low noise axial fan, air flow front to back

Protection
Input limiter, peak limiter
Start-up current limiting (soft start)
Protection circuit on and off transients
Under and over-voltage protection
DC-protection of outputs
Temperature monitoring of the heatsink and transistors

Realtime software-monitoring
Loudspeaker impedance measuring from each output channel (line-control)
Temperature measuring from each ampmodule
Real time meterbridge on PC per channel
Real time access for configuration on each channel
Speaker group building for access multiple speakers with one command

DSP sampling
64 bit, 96 kHz sample rate

DSP preset memory quantity
80 preset locations

Latency
0 - max. 500 microsecond

Dynamic range input
120 db

Nominal input level
+ 6 dbu

Maximum input level
+ 23 dbu

Limiter
Two per way, in each input and output

Filter
10 parametric filter each in- and output, use as Bell, Shelving, Notch, or Allpass filter

Long delay section
0 - 800 ms (max. 275 m delay) in each input

Short delay section
0 up to 17 ms (max. 6 m delay) per output for time alignment between the acoustic centers

Phase adjustment
0 - 180°

X-Over
Butterworth, Bessel, Linkwitz-Riley Filter

Software
Bi-directional realtime VA-WLAN-remote network, software for PC and MAC

Manual hand operation
with 2 x button and 1 x digital encoder-wheel in the internal menu navigation, function lockable

Display
1 x LED display
1 x LCD display with software dimmable and switchable

Body housing
19"/2 HE, 430 mm deep, strong black colored aluminum housing

Weight
4,1 kg

Alea-4

Speaker drivers
1 x 4" Neodym wideband transducer with 0,75" voice coil, cone waterproof treatment

System
Ultra compact mid-high loudspeaker

Frequency range
178 Hz - 19,5 kHz (- 10 dB)
217 Hz - 15,8 kHz (+/- 3 dB)

Coverage range (h x v)
70° x 70°

Impedance
16 Ω

Powerhandling 16 Ω
30 W AES / 60 W programm / 120 W peak

Sensitivity dB SPL 1 W/1 m
92 dB SPL

Sound pressure at (AES / programm / peak)
107 dB SPL / 110 dB SPL / 113 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN/OUT (all channels loop through), 1+/1-
1 x Phoenix contact terminal, 4 pole split into 2 x IN and 2 x OUT through wired with Speakon
Optional 100 V transformer

Mounting
3 x M10 mounting point on the side walls
Swivel bracket with raster for wall, ceiling, and floor mounting or mounting on truss means of a clamp
The swivel bracket can also be used as a stand
1 x M6 threaded bush for safety cable in the back side
Retractable mechanism for concealed wall, ceiling mount in the back side

Housing
15 and 12 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones

Front grille
Galvanized and powdered micromesh honeycomb grille can be custom designed with all RAL and effect colours
As an Option, grille and ornamental ring can also be coated in gold or chrome
Ornamental ring optional enhanced with Swarovski crystals


Dimensions / Weight
134 (h) x 134 (w) x 150 mm (d) / 1,4 kg

Aleasub-10

Speaker drivers
1 x 10" Ferrit Chassis (LF) with 3" voice coil, cone waterproof treatment

System
compact bass reflex subwoofer

Lower cut-off frequency
39 Hz (- 10 dB)
49 Hz (- 3 dB)

Coverage range (h x v)
Omnidirectional

Impedance
8 Ω active separated

Powerhandling LF 8 Ω
350 W AES / 700 W programm / 1.400 W peak

Sensitivity dB SPL 1 W/1 m
92 dB SPL

Sound pressure at (AES / programm / peak)
117 dB SPL / 120 dB SPL / 123 dB SPL

Connectors
2 x Neutrik NL4 Speakon IN/OUT (loop through), confi guration: 2+/2-
1 x Phoenix contact terminal, 4 pole split into 2 x IN/OUT

Handles
Handle can be attached to the back plate (optional)

Foot
4 included, can even be bolted to curtain marks when needed

Mounting
3 x M10 mounting point on the side walls
1 x M20 pole mount
Swivel bracket with raster for wall, ceiling, fl oor mounting or mounting on truss means of a clamp
Handle can be attached to the back plate (optional)
Retractable mechanism for concealed wall, ceiling mount in the back side

Housing
24 and 15 mm birch plywood CNC machine-splined and bolted

Finish
Water based textured black lacquer RAL 9005, 2 coats of varnish. Surface can be repaired and restored
As an Option, other surface colors according to RAL-tones

Front grille
Galvanized and powdered micromesh honeycomb grille can be custom designed with all RAL and effect colours
As an Option, grille and ornamental ring can also be coated in gold or chrome
Ornamental ring optional enhanced with Swarovski crystals

Dimensions / Weight
363 (h) x 306 (w) x 400 mm (d) / 14,7 kg