Info

The TS-212 is a 2-way, bi-amped, hybrid high-performance top unit, with 2 x 12" and 1 x 1.4" Neodym drivers. This speaker sets new standards in its class because of its light weight, compactness and Db SPL. The TS-212 is the world's smallest and lightest double 12" top.

The special placement and location of the two angled midrange horns with the centrally HF Driver enables delivery of a close and tight sound centre, as a pointed sound source.

The housing chambers of the 12" chassis are well ventilated by a “chimney” effect. This is due to the large bass reflex openings which reduce power compression. The amplifier power is thus used more effectively and efficiency is maintained even under long-term full power use. The bass-reflex bandpass hybrid technology of the TS -212 achieves very high efficiency, achieving as low as 100 Hz, and making strong low/mids possible.

The low threshold frequency allows the connection to any subwoofer system.

For fixed installations, the TS-212 has thirteen M10 mounting points with steel inner angles and a pole socket for wall mounts.

For maximum flexibility, the user can choose between two different beam angles, 60° x 40° or 90° x 60°. You can exchange horns at any time with the bi-amping control. The system amplifier HDSP-series has specific speaker settings stored as presets for both horns.

Control

The TS-212 is bi-amping operated on two channels of the HDSP-Amplifiers. This means that the channels can be separately limited, filtering can be optimized and time shifts compensated.

From one HDSP-6 amplifier can be powered bi-amping four TS-212.

Technical Data

Drivers
LF: 2 x 12" Neodym woofer (LF) with 3" voice coil
HF: 1 x 1,4" Neodym compression driver (HF) with 3" voice coil

Frequency range
100 Hz - 18 kHz

Coverage range (h x v)
90° x 60° / 60° x 40° (interchangeable, rotatable and arrayable horns)

Impedance
LF 8 Ω / HF 16 Ω

Powerhandling (AES / Peak)
LF: 900 W / 2.700 W
HF: 110 W / 440 W

Sensitivity 1 W/1 m
LF: 106 dB SPL
HF: 111 dB SPL

Sound pressure at (AES / Peak)
135,5 dB SPL / 140 dB SPL

Connection
2 x NEUTRIK NL4 IN/OUT 1+/1- (4-pole looped-through)

Finish
Warnex textured paint RAL-9005, 2 coats

Dimensions / Weight
698 (H) x 431 (W) x 368 mm (D) / 27,0 kg

Downloads

Accessoires

U-Bracket TS-212

Item no. 402121001

U-Bracket for TS-212. Is attached to the side using the enclosed M10 screws. To hang or closer alignment on a stand/distance rod.

TV pin

Item no. 999924519

TV pin with 28 mm diameter for mounting on TS-212 U-bracket. When frequent changes between flight and tripod use needs to be vice screwed on TS-212 U-bracket no hardware.

Self-lock clamp with tv pin entry

Item no. 999958241

Self-lock clamp with 28 mm tv pin entry.

Tv pin stand adapter

Item no. 999966350

Adapter for a 28 mm tv pin on a 35 mm speaker stand.

Eye Bolt

Item no. 999917370

M10 x 40 mm eye bolt is screwed into rearward mounting point and the speaker can also be secured directly to the housing with a safety cable.

Self-lock clamp

Item no. 999950731

Loudspeakers can be flown by one person with the self-lock clamp. The clamp hooks directly into the truss and can be easily tightened. Load capacity 250 kg.

Safety 6/1000

Item no. 999963100

1 m safety cable 6 mm Ø for securing a suspended loudspeaker. One side with a screwable quick connect.

Telescopic rod

Item no. 999921368

Telescopic rod with expanding mandrel system for play-free seating in the tripod base. Height: 110 to 180 cm. Max. load capacity: 35 kg.

Carrying bag for 2 x telescopic distance rods

Item no. 999921000

Extremely robust, padded carrying bag for two telescopic distance rods without crank, with two carrying straps and zippers. The padded partition wall protects the two distance rods from scratching. The floor and all load points are reinforced. Made of easy-care water-repellent nylon.

Distance rod with crank

Item no. 999921340

Distance rod for cranking with expanding mandrel system which provides a tight and firm fit for the speaker. Height: 92 - 152 cm. Max. load capacity: 50 kg.

Speaker stand crank

Item no. 999921300

Stable stand for cranking with double protection against falling. Height: 139 to 218 cm. Max. load capacity: 50 kg.

Speaker stand

Item no. 999921467

Stable stand with expanding mandrel system which provides a tight and firm fit for the speaker. Double protection against falling. Height: 132 - 220 cm. Max. load capacity: 50 kg.

Carrying bag for 2 x speaker stand/ rod

Item no. 999920000

Carrying bag for two speaker stands or distance rods, also with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.

Ring-Lock adapter

Item no. 999921441

Adapter for mounting on stands or speaker rods. With Expanding mandrel system which provides a tight and firm fit for the speaker.

1.4" Horn 60° x 40°

Item no. 999991464

1.4" removable horn with 60° x 40° radiation, rotated at 40° x 60°. Stable cast aluminium thus not cancel the driver unit possible. Through the bi-amping concept can select the appropriate preset for different horns and change at any time in the HDSP amplifiers and self-powered subwoofers.

1.4" Driver unit 60° x 40°

Item no. 999141464

1.4" removable horn and high-frequency driver with 60° x 40° radiation, rotated at 40° x 60°. Saves in frequent changes of horns dismantling the high-frequency driver.

1.4" Horn 90° x 60°

Item no. 999991495

1.4" removable horn with 90° x 60° radiation, rotated at 60° x 90°. Stable cast aluminium thus not cancel the driver unit possible. Through the bi-amping concept can select the appropriate preset for different horns and change at any time in the HDSP amplifiers and self-powered subwoofers.

1.4" Driver unit 90° x 60°

Item no. 999141495

1.4" removable horn and high-frequency driver with 90° x 60° radiation, rotated at 40° x 60°. Saves in frequent changes of horns dismantling the high-frequency driver.