Info

The Subhorn-115 is a hybrid bass horn with a 15" long excursion/stroke neodymium chassis.

This universal, single or multiple usage, high performance bass offers excellent sound quality in a compact package.

The extremely strong neodymium driver (B/L factor of 28) of the subwoofer reproduces low frequencies cleanly and accurately and at the same time produces a strong, punchy bass kick without being woolly. A clean attack and decay allows a high upper cut-off frequency and thus is useable with almost any top speakers.

The Subhorn-115 is supplied in left and right versions. The basses are assembled with a large horn aperture providing optimal coupling of the sound field resulting in higher efficiency.

The hybrid construction of a single Subhorn produces ample bass. No stacking or doubling up of basses is necessary. (This is normally required with conventional horns in order to effectively provide low frequencies.) The stacking design of horns of the Subhorn-115 with each additional bass has the advantage of enhancing the achievable lower limit frequency.

The stacking cavities and feet on the enclosure allow for horizontal and vertical stacking and ensure a safe arrangement without slipping. The bass can operate lying flat or standing upright. M20 pole mount sockets are installed on two sides of the housing.

There are 6 round handles affixed to the bass enabling handling by only one person. It is ideal for single or multiple usage. The Subhorn-115 masters all sound reinforcement applications either for small events as a satellite system with spacer rod and top unit, or for an event of more than 10.000 people, in large stacks.

The removable front wheel board facilitates transport. The demountable boards are stackable.

In addition to the rear mounted connecters there are two Speakon connectors in the speaker grille. These are used if the bass is located in under stage modules, or for convenient cabling or wiring of the reverse bass in cardioide bass arrays. The sockets in the grille and the back connector are protected against moisture with weather-proof capping.

The large 4"voice coil and elaborate ventilation openings in the magnet system make the chassis very strong, enable heat to be deposed and ensure low power compression. Unlike conventional bass horns, the 15" chassis in the Subhorn-115 is installed inverted for better heat eduction. The membrane cone operates in the sealed enclosure. The magnetic system is cooled by the air stream.

The Subhorn-115 can also be subsequently converted by the factory to the self-powered version with power amplifier module and the DSP board.

Control

The woofer is in 8 Ω.

The Subhorn-115 is powered by one channel (2.400 W/4 Ω) of HDSP-6, HDSP-4 or HDSP-3 nominal impedance is 4 Ω.

HDSP-Amplifiers contain presets to combine subwoofers with Voice-Acoustic tops. There are also presets for cardioid and bass-array application. One HDSP-6 or HDSP-4 can power up to four, one HDSP-3 up to two Subhorn-115.

Technical Data

Drivers
1 x 15" Neodym long excursion woofer (LF) with 4" voice coil

Lower cut-off frequency
35 - 220 Hz

Impedance
8 Ω

Powerhandling (AES / Peak)
1.000 W / 3.000 W

Sensitivity 1 W/1 m
103 dB SPL

Sound pressure at (AES / Peak)
131 dB SPL / 136 dB SPL

Connection
4 x NEUTRIK NL4 IN/OUT 2+/2-

Finish
Black Warnex textured paint RAL-9005, 2 coats

Dimensions / Weight
450 (H) x 610 (W) x 780 mm (D) / 35,0 kg

Downloads

Accessoires

Transport cover Subhorn-115

Item no. 501151100 | 501151200

Transport cover for Subhorn-115/115sp, stable Cordura fabric with padding, all handles and connections are cut.

Detachable wheelboard Subhorn-115

Item no. 501154000

Detachable wheelboard to mount on Subhorn-115/115sp, 15 mm wood with polyurea coating, stackable, 2 butterfly locks, 2 handles, 4 blue wheels, engraved logo.

Distance rod with crank

Item no. 999921340

Distance rod for cranking with expanding mandrel system which provides a tight and firm fit for the speaker. Height: 92 - 152 cm. Max. load capacity: 50 kg.

Telescopic rod

Item no. 999921368

Telescopic rod with expanding mandrel system for play-free seating in the tripod base. Height: 110 to 180 cm. Max. load capacity: 35 kg.

M20 Adapter 250 mm

Item no. 999921329

The 250 mm long adapter is perfectly suited as a M20 single rod or as an extension rod.

Carrying bag for 2 x speaker stand/ rod

Item no. 999920000

Carrying bag for two speaker stands or distance rods, also with crank. Two inside compartments with zipper and sturdy handles. Material waterproof nylon.

Cable Clip for speaker stand/ rod

Item no. 999935000

The cable clip made of robust, durable ABS plastic is specially designed for speaker stands and distance rods with 35 - 36 mm tube. It adheres firmly to the tube and holds the cables securely and neatly in the 24 x 16 mm guide accessible from the outside.

speakON cable 0.5/1/3/6/10/15/20/30 m

Item no. 80440XXX1

Speaker cables in various lengths with Neutrik plug NL4FX. 4 x 4 sq mm, each wire 224 x 0.15 copper, diameter 11 mm, weight 273 g / m. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

speakON adapter

Item no. 999654669

Adapter to connect two speaker cables.