Info

Intelligent power distributor, suitable for applications in temporary and permanent installations.

For maximum operating reliability of all connected equipment and smallest possible cut-offs the PD-32-6 V2 is equipped with novel fault current managment systems.

Standard power distributors have one residual-current-operated protective device (RCD) only. Each cut-off affacts the whole system and all power for all devices is off. The PD-32-6 V2 features six independent circuits (RCBO) which allows to switch off only the defective circuit and all other equipments remains online – The show can go on.

Big advantage is that possible errors can be spotted more easy as only the switched off equipment has to be monitored. A multimeasuring tool is also included to make mistake spotting even more easy and faster.

The built-in Run-time counter is essential in rental business and helps checking the real run-time of your equipment and checking the right maintenance periods.

In all three versions it has a 32 A CEE input with permanently connected 2 m cable H07RN-F 5G6 and a 32 A CEE output. Further outputs are designed as 6 x Schuko hinged cover sockets, and in parallel either 6 x Neutrik powerCON, 6 x Neutrik powerCON TRUE1, or 1 x Multipin ILME 16 pin. The Schuko hinged lid sockets can optionally be replaced by Swiss T23 standard or French/Belgian Schuko.

The PD-32-6 V2 power distributor is housed in a 19"/3HE housing.

One PD-32-6 V2 can power six HDSP-6 system amplifiers.

Technical Data

IN
32 A CEE Mennekes connector with 2 m cable (H07RN-F5G6)

OUT
6 x Schuko Mennekes
6 x Neurik powerCon (gray) NAC3MPB-1 (parallel to Schuko)
1 x Output CEE 32 A 400 V Mennekes, 5p. 6 h (detected from the multifunction measuring unit)

Protection:
6 x RCBO C 16 A 1p./0.03 A from ABB (Combination automat with 16 A circuit breaker and 30 mA RCD)

Other
3 x phase light
1 x multifunction measuring instrument
1 x earth screw
Internal cabling cabling with 6 and 2,5 qmm wire

Body housing
19"/3 HE, 260 mm deep, strong black colored steel housing

Weight
15,6 kg

Connection diagram PD-32-6 V2 powerCON
Connection diagram PD-32-6 V2 powerCON

Downloads

Accessoires

BAGAX 2HE/19" SDS Stack-Rack

Item no. 9B1910002

SDS Stack-Rack (Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 156 x 600 x 600 mm.

BAGAX 3HE/19" SDS Stack-Rack

Item no. 9B1910003

SDS Stack-Rack (Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 201 x 600 x 600 mm.

BAGAX 4HE/19" SDS Stack-Rack

Item no. 9B1910004

SDS Stack-Rack (Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 225 x 600 x 600 mm.

BAGAX 6HE/19" SDS Stack-Rack

Item no. 9B1910006

SDS Stack-Rack (Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 336 x 600 x 600 mm.

BAGAX 2HE/19"/ED SDS Stack-Rack

Item no. 9B1920002

ED SDS Stack-Rack (Extra Deep Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 156 x 600 x 780 mm.

BAGAX 4HE/19"/ED SDS Stack-Rack

Item no. 9B1920004

ED SDS Stack-Rack (Extra Deep Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 225 x 600 x 780 mm.

BAGAX 6HE/19"/ED SDS Stack-Rack

Item no. 9B1920006

ED SDS Stack-Rack (Extra Deep Slide-Door Shockmount) with retractable lids, label holder on front lid, external lock and recessed handles. Rack rails adjustable from outside with built-in device. Cable bushing for interconnecting cables with closed lid. Dimensions (HxWxD): 336 x 600 x 780 mm.

BAGAX Wheelboard for ED SDS & SDS Stack-Racks

Item no. 9B1940000

Wheelboard for ED SDS and SDS stack rack system. With stacking trays and locking system. 4 x blue wheels (two with brakes). Load capacity 450 kg.

BAGAX Clear-Door 2/3/4/6HE

Item no. 9B19300X

Lid for SDS stack racks made of impact-resistant acrylic glass with internal label holder. Can be used on the front and rear. Available in the heights 2HE, 3HE, 4HE and 6HE.

Schuko V6 3/6/10/15/20 m

Item no. 80325XXX4

Schuko 6-fold junction with Titanex H07RN-F 3 x 2,5 sq mm cable in various lengths. The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance.

powerCON TRUE1-TOP 3/6/10/15/20/30/50 m

Item no. 80325XXX3

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W-TOP and NAC3MX-W-TOP device connectors.

powerCON TRUE1-TOP-Schuko 3/6/10/15/20/30/50 m

Item no. 80325XXX2

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON TRUE1 - NAC3FX-W-TOP and Schuko device connectors.

powerCON-powerCON 3/6/10/15/20/30/50 m

Item no. 80325XXX3

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON - NAC3FCA and NAC3MPA-1 device connectors.

powerCON-Schuko 3/6/10/15/20/30/50 m

Item no. XXXXXXXXX

Titanex H07RN-F 3 x 2.5 sq mm cable in various lengths.The special jacket surface assumes little dirt and is easy to clean. Even cold nor flexible. Assembled with some pressed ferrules for maximum contact area and minimal contact resistance. With Neutrik powerCON NAC3FCA and Schuko device connectors.